NI IVI Compliance Package 2024 Q4 Win11 32/64bitEng NI IVI合规软件包下载ICP24.8.0
NI IVI Compliance Package 2024 Q4 Win11 32/64bitEng NI IVI合规软件包下载ICP24.8.0IVI合规软件包
IVI Compliance Package包含IVI类驱动程序和支持库，用于开发和利用基于IVI互换性的应用程序。
IVI Compliance Package包含了IVI类驱动程序、仿真驱动程序和基于IVI的NI编程环境的应用案例。IVI Compliance Package基于IVI Foundation制定的最新仪器编程规范，并遵守该规范。IVI Compliance Package中的IVI类驱动程序可与专门IVI专用的驱动程序配合使用。
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
发布日期：2024/10/8
包含的版本：2024 Q4完整版，版本号24.8.0
受支持的操作系统：
Windows 11
Windows Server 2022 64-bit
Windows 10 64-bit
Windows Server 2019 64-bit
语言：English
应用程序位数：32/64位
校验和：
文件大小: 500174848 字节 (477.00 MB)
修改日期: 2024-10-17 17:24
MD5: 5f8d718fda0a427e47a4876550a02803
SHA1: b7971493325d8cb8f2fbfbafaa64658870bca56a
SHA256: 8fc96b599306e56750c6f51b5880ac0399c6c78248dce0efd8a68e6f08ea94df
CRC32: 558f868e
百度网盘和NI官方下载地址：
请注册登录视觉论坛账号，购买附件查看下载地址
2024Q4版未更新自述文件，参考2022Q3版。
NI IVI Compliance Package 2022 Q3 ReadmeJuly 2022This file contains important information about the IVI Compliance Package (ICP), including installation instructions, new features, a list of bugs fixed for ICP 2022 Q3, and known issues.You can find more release information on ni.com.
[*]IVI Compliance Package Release Notes: Known issues, bugs fixed since the last release, and other notes about this release
[*]IVI Compliance Package Manuals: New features, behavior changes, and other documentation
OverviewInstalled ComponentsSupported Operating SystemsApplication Software SupportInstallation InstructionsUninstall ConsiderationsProduct Security and Critical UpdatesNew FeaturesKnown IncompatibilitiesAccessing the DocumentationAutomating the Installation of NI ProductsUsing NI Software with Microsoft Windows 10Legal InformationOverviewThe IVI Compliance Package is a software package that contains the IVI class drivers and support libraries necessary to develop and use applications that leverage IVI instrument interchangeability. The IVI Compliance Package also is based on and is compliant with the latest version of the instrument programming specifications defined by the IVI Foundation. You can use the IVI class drivers in the IVI Compliance Package with IVI specific drivers.IVI class drivers implement functions and attributes for controlling an instrument within a specified class, as defined by the IVI Foundation. The IVI Compliance Package provides IVI class drivers for the following specifications:
[*]IviACPwr
[*]IviCounter
[*]IviDCPwr
[*]IviDigitizer
[*]IviDmm
[*]IviDownconverter
[*]IviFgen
[*]IviPwrMeter
[*]IviRFSigGen
[*]IviScope
[*]IviSpecAn
[*]IviSwtch
[*]IviUpconverter
IVI specific drivers are drivers for the most popular instruments from all of the currently defined IVI Foundation classes and from the largest instrument manufacturers including National Instruments, Keysight Technologies, and Tektronix. You can create IVI specific drivers yourself, or download them from ni.com/idnet.Installed ComponentsDepending on the software support you select when you install ICP 2022 Q3, the installation includes one or more of the following components:
[*]IVI class drivers
[*]IVI class simulation drivers
[*]IVI class driver LabWindows/CVI support
[*]IVI class driver wrappers for LabVIEW 2019, 2020, 2021, and 2022
[*]IVI class driver examples for LabWindows/CVI, LabVIEW, and Measurement Studio
[*]IVI-COM adapters (32-bit only)
[*]IVI.NET adapters
[*]IVI Shared Components 2.6.1
[*]IVI.NET Shared Components 1.4.1
[*]IVI configuration plug-in for Measurement & Automation Explorer (MAX) 4.7 and later
[*]Documentation
Supported Operating SystemsICP supports the following operating systems:
[*]Windows 11
[*]Windows 10
[*]Windows Server 2022
[*]Windows Server 2019
[*]Windows Server 2016
[*]Red Hat Enterprise Linux 8
[*]Red Hat Enterprise Linux 7
[*]CentOS 8
[*]CentOS 7
[*]openSUSE Leap 15.2
[*]openSUSE Leap 15.1
[*]Ubuntu 20.04
[*]Ubuntu 18.04
NoteICP no longer supports Windows Vista/XP/7/8.x, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. ICP 2022 Q3 will not install or run on an unsupported OS. You cannot deploy or distribute applications that use ICP 2022 Q3 to an unsupported OS. Additionally, after installing ICP 2022 Q3, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.For more information about the changes to our OS support, visit https://www.ni.com/r/win32bitsupport.Application Software SupportICP supports the following application software versions, including service packs. If you are not using NI application software, refer to Microsoft Visual Studio Support.
Application SoftwareVersions Supported by ICP
LabVIEW2019 and later
NI LabWindows™/CVI™2017 and later
This product no longer supports LabVIEW NXG. Refer to LabVIEW NXG on ni.com for more information about LabVIEW NXG Life-Cycle Dates and driver version support.Installation InstructionsDownload the IVI Comliance Package installer from ni.com/downloads. NI software includes NI Package Manager to handle the installation. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.Notes
[*]If Windows Update is enabled, the installation process might hang if Windows Update interferes with the installation of Microsoft Visual C++ 2015 Run-Time. Visit ni.com/r/exjq43 for more information and steps to resolve this issue.
Updated LabVIEW Compatibility PolicyThe "IVI Compliance Package Support for LabVIEW" package supports applications using ICP with LabVIEW 2022 or later. When installing ICP 2022 Q3, this package will be recommended if you have already installed LabVIEW 2022 or later and installs to the LVAddons directory.LVAddons directory location: C:\Program Files\NI\LVAddonsTo install the stand-alone, web-only version of ICP, complete the following steps:
[*]Download the ICP 2022 Q3 installer from http://www.ni.com/downloads/drivers/ by searching for IVI Compliance Package.
[*]Double-click on the installer file.
[*]Click OK to begin installation.
[*]Follow the directions that appear on the screen.
Installation Notes
[*]The ICP 21.0 and later stand-alone, web-only distributions do not install NI I/O Trace (formerly known as NI-Spy) or MAX. You can install NI I/O Trace and MAX using several other National Instruments products, including the NI Device Drivers media.
[*]The installation directory for LabWindows/CVI IVI Class examples and IVI Class Simulation drivers has been changed. The new installation directory is <All Users>\Documents\National Instruments\CVI\Samples\IVI directory.
[*]ICP 3.2 and later include IVI-COM adapters, which enable users to use IVI-C and IVI-COM specific drivers interchangeably in the same 32-bit application. For more information on IVI-COM adapters, refer to the IVI-C Class Driver Support for IVI-COM Specific Drivers document.
[*]ICP 19.0 and later include IVI.NET adapters, which enable users to use IVI-C and IVI.NET specific drivers interchangeably in the same application.
[*]ICP 4.5 and later install alternate FP and SUB files for the IviFgen class driver in order to support setting 64-bit integer attributes. For more information, refer to KnowledgeBase 5WOA752F: Issue Setting IviFgen Attribute ID Using Get/Set/CheckAttributeViInt64 Functions.
Uninstall ConsiderationsAfter you uninstall ICP 2022 Q3, the IVI Shared Components remain on the system. To remove the remaining components, right-click IVI Shared Components 3.0 and select Uninstall/Change.If you installed ICP 2022 Q3 as part of another distribution that depends on ICP 2022 Q3, you cannot uninstall ICP 2022 Q3 without uninstalling the dependent product.Product Security and Critical UpdatesVisit ni.com/security to view and subscribe to receive security notifications about NI products. For information about critical updates from NI, refer to Available Critical and Security Updates for NI Software.New FeaturesThis release includes the following new features:
[*]Added support for LabVIEW 2022 Q3
Known Incompatibilities
[*]In ICP 19.5 and IVI Shared Components 2.6 or later, the installers no longer unlock the IVI Foundation directory. Therefore, you no longer can modify the files installed under the IVI Foundation directory.
Accessing the DocumentationRefer to the National Instruments IVI™ Driver Help, accessible from Start>>All Programs>>National Instruments>>ICP Documentation>>IVI Driver Help, for information about the ICP 2022 Q3.Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.Using NI Software with Microsoft Windows 10For more information about NI support for Windows 10, refer to NI Product Compatibility for Microsoft Windows 10.Legal InformationCopyright©1999–2022 National Instruments Corporation. All rights reserved.Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.End-User License Agreements and Third-Party Legal NoticesYou can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
[*]Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
[*]EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
[*]Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted RightsIf you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.IVI Foundation Copyright NoticeContent from the IVI specifications reproduced with permission from the IVI Foundation.The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.TrademarksRefer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.An NI Partner is a business entity independent from NI and has no agency, partnership, or joint-venture relationship with NI.PatentsFor patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
页:
[1]