注册登陆后可查看附件和大图，以及购买相关内容
您需要 登录 才可以下载或查看，没有账号？注册会员
x
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI Vision Acquisition Software 2013.09 LabVIEW2013 Win32/64Eng 视觉采集软件VASSeptember2013
VAS2013.09 相较于VAS2013.08增加了一些新硬件的支持。其它差别不大，如果不是刚好遇到这类硬件，两个版本都可以适用于LabVIEW2013。如果担心遇到问题，那就装VAS2013.09，升级的理论上会更好一些。
文件大小: 2109392340 字节 (1.96 GB)
修改日期: 2013-12-24 21:20
MD5: 507e75574ed7554c419a79f4a5a523a9（官方正确）
SHA1: a008745a6e72817efffef38658b12e28a0abf69d
SHA256: 33153510ee50a3b003d7ae2621506e0e069e70fdfc67cf83fbea5dd0617b9e60
CRC32: 191c9f23
百度云盘下载和NI官方下载地址：
请购买附件下载查看
VAS2013.09.txt
(391 Bytes, 下载次数: 76, 售价: 10 元)
NI Vision Acquisition Software Release NotesSeptember 2013 This file contains important information about National Instruments Vision Acquisition Software, and is organized into the following sections: New Features
Upgrade Considerations for Legacy NI-IMAQ for IEEE 1394 Cameras
Minimum System Requirements
Updates and Improvements
Software Support
Installation
Automating the Installation of NI Products
Configuring NI-IMAQ
Configuring NI-IMAQdx
Known Issues
Documentation
How to Use NI Software with Microsoft Windows 8
NI Software Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 NI Vision Acquisition Software allows you to acquire, display, and save images; control digital I/O on National Instruments image acquisition devices; and configure your driver software and hardware.
New FeaturesThis release of Vision Acquisition Software includes the following new features: NI-IMAQdx 4.3NI-IMAQdx is driver software that supports NI 177x smart cameras, as well as IEEE 1394, GigE Vision, DirectShow-compatible USB, USB3 Vision cameras, and IP cameras. - Support for the NI CVS-1457RT
- Support for USB3 Vision cameras on VxWorks CompactRIO and Single-BoardRIO Real-Time targets
NI-IMAQ I/O 2.8NI-IMAQ I/O provides support for reconfigurable input/output (RIO) using National Instruments EVS-1460 Series Embedded Vision Systems, compact vision systems, and other GigE Vision and IEEE 1394 reconfigurable image acquisition devices. - Support for the NI CVS-1457RT
- NI-IMAQ I/O can be added as an additional installer in LabVIEW Application Builder
Upgrade Considerations for Legacy NI-IMAQ for IEEE 1394 CamerasNI-IMAQdx no longer supports Legacy NI-IMAQ for IEEE 1394 Cameras. This version of NI-IMAQdx uninstalls the Legacy NI-IMAQ for IEEE 1394 Cameras feature of NI-IMAQdx 3.3 or earlier. If you require Legacy NI-IMAQ for IEEE 1394 Cameras, you must download and install it separately. Visit ni.com/infoand enter the info code legacy1394 for information about how to install Legacy NI-IMAQ for IEEE 1394 Cameras. This version of NI-IMAQdx does not affect separate installations of Legacy NI-IMAQ for IEEE 1394 Cameras. Porting Existing Legacy NI-IMAQ for IEEE 1394 Cameras Applications to NI-IMAQdxIn most cases, there is a one-to-one correlation between an NI-IMAQdx VI or function and Legacy NI-IMAQ for IEEE 1394 Cameras VI or function. For example, the IMAQ 1394 Snap VI has been replaced with the IMAQdx Snap VI and takes similar parameters. You set and get camera attributes differently for each driver. For example, with Legacy NI-IMAQ for IEEE 1394 Cameras, you passed in an enumerated type that contained the attribute name and a value. With NI-IMAQdx, you pass a string with the attribute name and value. Another major difference between the two drivers is that NI-IMAQdx now supports the Event Structure in LabVIEW. Rather than using occurrences, as you did with Legacy NI-IMAQ for IEEE 1394 Cameras, you can now register the Frame Done event to fire in LabVIEW for more readable code. Maintenance and Support PolicyNational Instruments recommends that all new applications be developed with NI-IMAQdx. All new features, bug fixes, or other enhancements in the future will be made to the NI-IMAQdx driver and API. NI-IMAQ for IEEE 1394 Cameras is "frozen" to ensure that the behavior of existing applications does not change. NI-IMAQdx no longer includes Legacy NI-IMAQ for IEEE 1394 Cameras. This version of NI-IMAQdx uninstalls Legacy NI-IMAQ for IEEE 1394 Cameras. If you requires Legacy NI-IMAQ for IEEE 1394 Cameras, you must download and install it separately. Visit ni.com/info and enter the info code legacy1394 for information about how to install Legacy NI-IMAQ for IEEE 1394 Cameras. National Instruments Applications Engineers no longer support the Legacy NI-IMAQ for IEEE 1394 Cameras API.
Minimum System RequirementsThe development computer must meet the following requirements to run NI Vision Acquisition Software: | Processor | Pentium 4 1 GHz or equivalent | | Memory | 512 MB RAM | | Display | 1,024 × 768 resolution video adapter with a 16-bit display | Minimum Recommended
Free Hard Disk Space | Vision Acquisition Software | 2 GB | | NI-IMAQ | 1 GB | | NI-IMAQdx | 1 GB | | NI-IMAQ I/O | 1.5 GB | | Operating System | Windows 8/7/Vista/XP SP3 (32-bit)/Server 2008 R2/Server 2003 R2 (32-bit) | | Browser | Microsoft Internet Explorer 6.0 or later |
Updates and ImprovementsThe following list describes issues in previous versions of the NI Vision Development Module that are fixed in this release. If you have a CAR ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of the NI Vision Development Module. | ID | Fixed Issue | | 427191 | When Multiple Vision Acquisition Express VIs are in use, they cannot save to different image logging paths. | | 425502 | Unplugging a USB3 Vision camera when a NI-IMAQdx session is open on the camera can cause a potential hang. | | 425436 | Some attributes do not properly refresh when using a Basler Ace USB3 Vision camera. | | 425042 | niimaqdx.lib installs into the wrong directory for LabWindows/CVI. | | 424480 | Setting an attribute with an empty string causes a crash. | | 424407 | Saving a camera file on a Basler Ace USB3 Vision camera can result in an error in getting the attribute. | | 422281 | USB R Series DAQ devices cannot be detected in LabVIEW 2013 when NI-IMAQ I/O 2.7 is also installed. | | 420546 | Measurement and Automation Explorer crashes when using a DirectShow camera without any video modes. | | 418479 | The NI PCIe-1473R is not detected on desktop PCs used as Real-Time targets. | | 383188 | NI-IMAQdx generates a large amount of network traffic on NI Linux Real-Time targets when Measurement and Automation Explorer is open. | | 325222 | NI PCIe-1473R RioClk40 is unconstrained. |
Software SupportThis section describes the operating systems and application development environments (ADEs) supported by NI Vision Acquisition Software. Operating Systems- LabVIEW Real-Time Module 2010 or later
- Windows 8/7/Vista/XP SP3 (32-bit) SP2/Server 2008 R2/Server 2003 R2 (32-bit). Refer to the following table for more information.
Note NI Vision Acquisition Software does not support Windows Server non-R2 editions. | Device | Windows 8/7/Vista/XP SP3/Server 2003 R2 32-bit versions | Windows 8/7/Vista/Server 2008 R2 64-bit versions | NI 1405 | Yes | Yes* | NI 1407 | Yes | Yes* | NI 1408 | No | No | NI 1409 | Yes | Yes* | NI 1410 | Yes | Yes* | NI 1411 | Yes | Yes* | NI 1422 | Yes | Yes* | NI 1424 | Yes | Yes* | NI 1426 | Yes | Yes* | NI 1427 | Yes | Yes*† | NI 1428 | Yes | Yes* | NI 1429 | Yes | Yes*† | NI 1430 | Yes | Yes*† | NI 1433 | Yes | Yes*† | NI 1435 | Yes | Yes*† | NI 1473R | Yes | Yes*† | NI 1483 | Yes | Yes* | NI 8231 | Yes | Yes | NI 8234 | Yes | Yes | NI 8235 | Yes | Yes | NI 8236 | Yes | Yes | NI 8237R | Yes | Yes | NI 8252 | Yes | Yes | NI 8254R | Yes | Yes | NI 8255R | Yes | Yes | | * Applications developed using LabVIEW 8.2.1 or later will run on systems with more than 3 GB of physical memory. Applications developed using other development environments, such as Microsoft Visual C, Visual Basic, and .Net, are limited to systems with 3 GB or less of physical memory. All 32-bit applications, including those developed using LabVIEW, may not allocate more than 2 GB of memory total. † A firmware update is available for this device to allow non-LabVIEW applications to run on systems with more than 3 GB of physical memory. To update the device firmware, launch MAX and select Tools»NI Vision»Update NI-IMAQ Device Firmware. |
Remote Target SupportNI Vision Acquisition Software September 2011 was the last version of NI Vision Acquisition Software to provide support for the NI 1762 Smart Camera and the NI 1764 Smart Camera. New software features of NI Vision Acquisition Software will not work on these devices. Backward compatibility for existing applications is maintained. NI Vision Acquisition Software February 2013 was the last version of NI Vision Acquisition Software to provide support for the NI 1454, 1455, and 1456 Compact Vision Systems. New software features of NI Vision Acquisition Software will not work on these devices. Backward compatibility for existing applications is maintained. Development Environments- LabVIEW 2010 or later
- LabWindows/CVI 8.1 or later
- Microsoft Visual C/C++ 6.0 or later
- Microsoft Visual Basic 6.0 or later
- Microsoft Visual Studio .NET 2005 and 2008 (except NI-IMAQ I/O)
Additional SoftwareYou can also use NI-IMAQ, and NI-IMAQdx with the following National Instruments software packages to prototype, benchmark, and deploy your applications. - NI Vision Development Module 7.1 or later
- NI Vision Builder for Automated Inspection (Vision Builder AI) 2.5 or later
Installation InstructionsComplete the following steps to install NI Vision Acquisition Software: Note: You must have administrator access to install the NI Vision Acquisition Software. - Insert the NI Vision Acquisition Software installation media.
- If you do not have autorun enabled, double-click autorun.exe. If you have autorun enabled, autorun.exe runs automatically.
- Follow the onscreen instructions.
NI-IMAQ and NI-IMAQdx integrate with MAX, the National Instruments utility for configuring and testing your measurement and automation system. The MAX icon appears on your desktop after you install NI Vision Acquisition Software. Installing from an NI Software Suite or NI Product BundleIf you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.
Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software. If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software. For more information, refer to the following KnowledgeBase articles: - For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
- For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
- To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Configuring NI-IMAQComplete the following steps to install an image acquisition device and configure NI-IMAQ: Note: You must install NI-IMAQ before installing your image acquisition device. Caution: Power off and unplug the computer before installing your hardware. Wait for any motherboard LEDs to power off before proceeding, since some computers remain powered for some time after being unplugged. - Install your image acquisition device, and connect the camera. Refer to the device documentation for specific hardware installation instructions.
- Run MAX.
- Double-click the MAX icon on the desktop. You can use MAX to modify camera properties. Once you have saved these properties, they become the default settings for all NI-IMAQ applications.
- Expand Devices and Interfaces and NI-IMAQ Devices to display a list of the image acquisition devices installed on your computer.
- Select a camera file, and acquire an image.
- Click the plus sign next to the image acquisition device to expand the menu tree and list the available channels or ports. Right-click the channel or port to display a list of available cameras.
- Select the appropriate camera type from the list. Camera type selection varies according to the image acquisition device installed.
- To change the camera settings, modify the parameters at the bottom of the image viewer panel.
- You can acquire an image in the following ways:
- Use the Snap button to acquire and display a single image with the image acquisition device.
- Use the Grab button to acquire images continuously. A grab allows you to focus the camera.
Tip: For a complete list of supported cameras, right-click the channel or port, select Camera, and click Search ni.com. Note: Refer to the right side of the MAX user interface, which displays context-sensitive help, for information about configuring image acquisition devices with MAX. Configuring a Remote PXI/Compact PCIe Image Acquisition DeviceUse MAX to install NI-IMAQ for LabVIEW Real-Time from the host machine onto the target system. The NI-IMAQ for LabVIEW Real-Time components enable the remote device to acquire and analyze images as directed by the host machine. Note: Install NI-IMAQ and the LabVIEW Real-Time Module on the remote system before you install and configure the image acquisition device. Follow the steps in the MAX help window to install software. Tip: Configuring remote image acquisition devices is similar to configuring local image acquisition devices, except that the procedure for working with camera files is different. Refer to the Measurement & Automation Explorer Help for NI-IMAQ for information about working with camera files on remote image acquisition devices. - Launch MAX.
- In the Configuration tree, expand Remote Systems.
- Expand the appropriate system.
- Expand Devices and Interfaces.
- Expand NI-IMAQ Devices.
- Expand the device you want to configure.
Refer to the Measurement & Automation Explorer Help for NI-IMAQ for information about configuring specific NI image acquisition devices. You can access this help file from the MAX Help menu by selecting Help»Help Topics»NI Vision»NI-IMAQ.
Configuring NI-IMAQdxComplete the following steps to install and configure NI-IMAQdx. If you are using a USB camera, ensure that the camera is compatible with DirectShow, and that the camera driver is installed and functioning. For specific information about drivers and camera compatibility, consult your camera manufacturer documentation. Instructions for configuring an IEEE 1394 or GigE Vision camera are included in the Measurement & Automation Explorer Help for NI-IMAQdx. You can access this help file from the MAX Help menu by selecting Help»Help Topics»NI Vision»NI-IMAQdx. Installing IEEE 1394 HardwareInstall your IEEE 1394 interface card. Follow the installation instructions provided by the manufacturer. Installing the High Performance GigE Vision DriverIf you have an Intel Pro/1000 Series gigabit Ethernet Network Interface Card (NIC), it is recommended that you install the High Performance GigE Vision Driver. This will ensure optimized performance and minimal configuration. To associate your hardware with the high performance driver, complete the following steps. Installing the Universal GigE Vision DriverNI-IMAQdx will work with any standard gigabit Ethernet NIC. To use NI-IMAQdx with a standard gigabit Ethernet NIC, complete the following steps: Configuring Multiple PortsIf you plan to use multiple ports with NI-IMAQdx, complete the following steps: Configuring NI-IMAQdx for WindowsComplete the following steps to configure NI-IMAQdx for Windows: - Connect the camera.
- Run MAX.
- Double-click the MAX icon on your desktop. You can use MAX to modify camera attributes. After you have saved these attributes, they become the default settings for all NI-IMAQdx or NI Vision applications.
- Expand Devices and Interfaces»NI-IMAQdx in the configuration tree to display a list of the cameras installed on your computer.
- For IEEE 1394 cameras, NI-IMAQdx may not be associated with the camera. If this is the case, change the associated driver by right-clicking the camera and selecting Driver»NI-IMAQdx.
- Select the camera from the list. You then can view or modify the camera attributes on the Camera Attributes tab located below the image viewer.
Tip: Click the Show Help button to display the help window on the right side of the image viewer. Move your mouse over the properties to view context-sensitive help in the bottom half of the help window. Configuring NI-IMAQdx for the LabVIEW Real-Time ModuleIf you are using a Windows development machine, the LabVIEW Real-Time Module, and an RT target, complete the following steps to install and configure NI-IMAQdx: Note: NI-IMAQdx does not support USB cameras on the LabVIEW Real-Time Module. Configuring USB3 Vision hardware on Windows XPWindows will not automatically assosciate the correct driver with USB3 Vision cameras. Complete the following steps to configure your USB3 Vision camera: - Connect the camera.
- Locate the camera in Device Manager.
- Right-click the camera and select Update Driver.
- Choose not to connect to the Windows Update Web site, and click Next.
- Choose to Install from a list or a specific location, and click Next.
- Choose Don't Search. I will choose the driver to install.
- Click Have Disk....
- Click Browse and navigate to Program Files\National Instruments\NI-IMAQdx\Staging\NI USB3 Vision.
- Click OK. In the next window, select your device, then click Next.
- A warning will appear. Click Continue Anyway.
- Click Finish.
Known IssuesNI-IMAQ- In LabVIEW 2012 and earlier, error codes returned during a property node read or write are not being reported correctly. The status flag is set correctly, to notify you that an error occurred, but the code is set to an invalid value.
NI-IMAQdx- Volume License Manager will attempt to check out available Vision Development Module licenses before trying Vision Acquisition Software licenses.
- Attempts to extend the evaluation period for Vision Acquisition Software licenses from within LabVIEW or the LabVIEW Run-Time Engine are unsuccessful in connecting to the internet.
- Unplugging a USB3 Vision camera on NI Linux or VxWorks Real-Time targets can cause a crash.
- Bayer VNG decoding can overflow when decoding 16-bit Bayer pixel formats.
- The Bayer bilinear algorithm does not properly decode pixels on the right side of the image for certain image widths.
NI-IMAQ I/O- On NI CVS-1457RT targets, serial configuration is not available in MAX. Programmatic configuration is still available in Vision Builder AI and LabVIEW.
- In LabVIEW 2013, Project Explorer displays the NI 1454, 1455, and 1456 Compact Vision Systems. However, LabVIEW 2013 does not support the NI 1454, 1455, and 1456 Compact Vision Systems.
DocumentationDocumentation is installed onto your hard drive with NI Vision Acquisition Software. The documentation ships as Adobe Acrobat portable document format (PDF) files and HTML Help files. To view the NI Vision Acquisition Software documentation, select Start»All Programs»National Instruments»Vision»Documentation. Note: You must have Adobe Acrobat Reader installed to view the PDFs. Refer to the Adobe Systems Incorporated Web site at www.adobe.com to download the latest version of Adobe Reader. NI LabVIEW DocumentationYou can access the NI-IMAQ VI Reference Help, NI-IMAQdx VI Reference Help, and NI Vision-RIO VI Reference Help from the LabVIEW Help menu. In LabVIEW, select Help»NI Vision for LabVIEW Help. .NET DocumentationThe NI Vision Acquisition Software .NET documentation merges into the NI Measurement Studio Help. The NI Measurement Studio Help integrates into the Visual Studio Combined Help Collection under the Measurement Studio node in the Table of Contents. In order for links from Measurement Studio help topics to .NET Framework help topics to work, you must install the product documentation for Visual Studio, which installs the MSDN Library. This requires a secondary installation during the Visual Studio installation process. The NI Measurement Studio Help is in the Microsoft Help 2.0 format and requires a Microsoft Help 2.0 viewer to be displayed. A Microsoft Help 2.0 viewer is installed with both Microsoft Visual Studio and the Microsoft .NET Framework SDK. The SDK is freely available from MSDN at http://www.microsoft.com/downloads. If you do not have either of these products, you will need a standalone Microsoft Help 2.0 viewer to display the documentation. Some Help 2.0 viewers are available for download, such as Helpware's H2Viewer.
How to Use NI Software with Microsoft Windows 8When you install National Instruments software on Microsoft Windows 8, you will notice a few additional tiles on the Start screen, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (MAX), and the new NI Launcher. Using NI LauncherNI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile on the Start screen. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it. | Note MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8. You can launch MAX either from the Start screen or from within NI Launcher. |
Pinning Frequently Used ApplicationsFor convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary: | Current Application | Icon Location | Pin to Action | | Windows 8 Desktop | Desktop Taskbar | Right-click application and select Pin to Taskbar | | Windows 8 Desktop | Start screen | Right-click application and select Pin to Start | | Windows 8 Start screen | Desktop Taskbar | Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen |
Finding All ProgramsIf you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files by right-clicking anywhere on the Start screen and selecting All apps. A list of all installed software and related files appears, in alphabetical order by creator or type. For more information about NI support for Windows 8, visit ni.com/windows8.
NI Vision Acquisition Software Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016National Instruments Vision Acquisition Software will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of Vision Acquisition Software that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes: | Product | Info Code | | NI LabVIEW | lifecycle | | NI LabWindows™/CVI™ | cvi_lifecycle | | NI Measurement Studio | mstudiolifecycle | | NI TestStand | tslcp | | NI DIAdem | ddlcp | | NI SignalExpress | selcp | | NI VeriStand | nivslifecycle |
Copyright© 2013 National Instruments Corporation. All rights reserved. Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation. National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction. End-User License Agreements and Third-Party Legal NoticesYou can find end-user license agreements (EULAs) and third-party legal notices in the following locations: - Notices are located in the directories.
- EULAs are located in the \Shared\MDF\Legal\license directory.
- Review \_Legal Information.txt for information on including legal information in installers built with NI products.
TrademarksNational Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks. The registered trademark Linux® is used pursuant to a sublicense from LMI, the exclusive licensee of Linus Torvalds, owner of the mark on a world-wide basis. Other product and company names mentioned herein are trademarks or trade names of their respective companies. PatentsFor patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
| 
发表于 2013-12-19 21:56:07
发表于 2013-12-24 09:19:26
