NI LabVIEW 2013 Database Connectivity Toolkit Win32Eng LV2013DCT数据库连接工具包32位版

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI LabVIEW 2013 Database Connectivity Toolkit Win32Eng LV2013DCT数据库连接工具包32位版

数据库工具包，后面的几代版本，在安装LabVIEW时就已经包含在内部，可以在安装时直接选择安装数据库连接工具包，不需要再单独下载安装，如果早期的版本没有包含数据库工具包，则可以下载该独立版本。也可以使用第三方的免费的LabSQL工具包。在2019以前的版本没有64位的工具包，如需要64位的工具包，需要升级2019或之后版本。

百度网盘下载链接：
请注册视觉论坛会员登录后购买附件下载查看
DCT2013.txt (367 Bytes, 下载次数: 49, 售价: 10 元)

2020-9-10 15:59 上传

点击文件名下载附件
DCT2013

LabVIEW 2013 Database Connectivity Toolkit Readme

Version 13.0.0

June 2013

This file contains important information about the LabVIEW Database Connectivity Toolkit, including installation instructions, a partial list of recommended database client software for Database Connectivity Toolkit 2013, and known issues.

System Requirements

Installation Instructions

Recommended Database Client Software

Known Issues

Accessing the Help

Finding Examples

Automating the Installation of NI Products

How to Use NI Software with Microsoft Windows 8

NI Software Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003

---

System Requirements

In addition to the system requirements for the LabVIEW Development System, the LabVIEW Database Connectivity Toolkit has the following requirements:

• LabVIEW 2013 Base, Full, or Professional Development System (32-bit)
• At least 40 MB of disk space
  

Refer to the LabVIEW Readme for additional system requirements and supported operating systems for LabVIEW 2013.

Installation Instructions

Before installing the Database Connectivity Toolkit, uninstall any previous versions of the SQL Toolkit for G that you have installed. The Database Connectivity Toolkit and the SQL Toolkit for G use different methods of communicating with databases. Sharing VIs between toolkits can result in errors.

You can install all of your LabVIEW products—including the Database Connectivity Toolkit—using the LabVIEW 2013 Platform DVDs. Refer to the LabVIEW Installation Guide on the LabVIEW Platform DVD 1 for installation instructions and system requirements.

To request additional LabVIEW Platform DVDs, refer to the National Instruments website.

Note  If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.

Note  Due to differences between the ActiveX interface of different versions of the Microsoft ADO driver, National Instruments recommends that you mass compile the Database Connectivity VIs after installation to improve performance.

Recommended Database Client Software

The Database Connectivity Toolkit works with any database or data source that has ODBC or OLE DB drivers. The following list describes issues and recommendations for which database client software to use. Refer to the Known Issues section of this readme for database-specific issues.

• Microsoft Access—National Instruments recommends that you use the Microsoft Jet 4.0 or later OLE DB Provider.
• Microsoft SQL Server—National Instruments recommends that you use the Microsoft OLE DB Provider for SQL Server.
• Oracle—You must install Oracle Client software on the machine to which you install the Database Connectivity Toolkit. National Instruments recommends that you use the Oracle Provider for OLE DB 8.1.6.2.0 or later. You can download the Oracle Provider from the Oracle website at www.oracle.com.
  

Known Issues

You can access the software and documentation known issues list online. Refer to the National Instruments website for an up-to-date list of known issues in the Database Connectivity Toolkit.

Accessing the Help

The LabVIEW Database Connectivity Toolkit User Manual contains conceptual information about using the Database Connectivity Toolkit. Open this manual by navigating to the labview\manuals directory and opening DCT_User_Manual.pdf.

Refer to the LabVIEW Help, accessible by selecting Help»LabVIEW Help from LabVIEW, for information about the Database VIs and function.

Finding Examples

Select Help»Find Examples from LabVIEW to launch the NI Example Finder. Navigate to the Toolkits and Modules»Database Connectivity folder to find LabVIEW examples for the Database Connectivity Toolkit. You also can find these examples in the labview\examples\database directory. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information, refer to the following KnowledgeBase articles:

• For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
• For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
• To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
  

How to Use NI Software with Microsoft Windows 8

When you install National Instruments software on Microsoft Windows 8, you will notice a few additional tiles on the Start screen, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (MAX), and the new NI Launcher.

Using NI Launcher

NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile on the Start screen. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.

Note  MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8. You can launch MAX either from the Start screen or from within NI Launcher.

Pinning Frequently Used Applications

For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:

Current Application	Icon Location	Pin to Action
Windows 8 Desktop	Desktop Taskbar	Right-click application and select Pin to Taskbar
Windows 8 Desktop	Start screen	Right-click application and select Pin to Start
Windows 8 Start screen	Desktop Taskbar	Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen

Finding All Programs

If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files by right-clicking anywhere on the Start screen and selecting All apps. A list of all installed software and related files appears, in alphabetical order by creator or type.

For more information about NI support for Windows 8, visit ni.com/windows8.

NI LabVIEW Database Connectivity Toolkit Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016

National Instruments LabVIEW Database Connectivity Toolkit will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of Database Connectivity Toolkit that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:

Product	Info Code
NI LabVIEW	lifecycle
NI LabWindows™/CVI™	cvi_lifecycle
NI Measurement Studio	mstudiolifecycle
NI TestStand	tslcp
NI DIAdem	ddlcp
NI SignalExpress	selcp
NI VeriStand	nivslifecycle

---

Copyright

© 1999-2013 National Instruments. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

• Notices are located in the \_Legal Information and directories.
• EULAs are located in the \Shared\MDF\Legal\license directory.
• Review \_Legal Information.txt for information on including legal information in installers built with NI products.
  

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.