NI DIAdem 2014SP1 Win32Eng NI数据管理软件DIADEM2014SP1基本高级专业版下载DIAdem14.0.1

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI DIAdem 2014SP1 Win32Eng NI数据管理软件DIADEM2014SP1基本高级专业版下载DIAdem14.0.1

diadem_2014_sp1_english.exe，从2014版起，将默认包含DAC模块，不再另外发行DAC版本的DIAdem软件。

DIAdem是一款应用软件，可帮助您快速查找、检查、分析和报告测量数据。
DIAdem是一个统一的单一软件环境，可帮助您更高效地进行测量数据后期处理。 DIAdem针对大型数据集进行了优化，内含的工具可帮助您快速搜索所需的数据，查看和研究数据，使用特定工程分析函数转换数据，并使用强大的拖放式报告编辑器共享结果。 您可以在DIAdem中使用脚本来自动执行重复的数据后处理任务，并高效地将测量数据转换为有价值的信息。

百度网盘下载地址（限速，请开会员或使用破解限速工具）：
请注册视觉论坛会员，登录购买附件查看，充值请联系在线客服

NI官方下载地址（可能无效或无法下载完成）：
请注册视觉论坛会员，登录购买附件查看，充值请联系在线客服

DIAdem14.0.1-2014SP1.txt (261 Bytes, 下载次数: 1, 售价: 10 元)

2020-8-9 23:31 上传

点击文件名下载附件
DD2014SP1

DIAdem 2014 SP1 Release Notes

2014

Version 14.0.1

December 2014

This file contains information on DIAdem 2014 and DIAdem 2014 SP1:

Overview

System Requirements

Notes on DIAdem 2014

Compatibility of DIAdem 2014 SP1 to DIAdem 2014

Compatibility of DIAdem 2014 to DIAdem 2012

Product Security and Critical Updates

New Features in DIAdem 2014

Bug Fixes

Accessing the Help

Finding Examples

Automating the Installation of NI Products

How to Use NI Software with Microsoft Windows 8.x

NI Software Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003

Legal Information

---

Overview

DIAdem is the National Instruments software for analyzing and documenting data from various sources.

System Requirements

For correct DIAdem performance, the following minimum requirements must be met:

Hardware

CPU	x86 compatible processor, 1.6 GHz or more
Amount of memory	1 GB or more
Hard disk memory	Depending on the operating system, up to 2.8 GB free storage space, of which at least 1.8 GB on the system partition
Graphics board	Color depth at least 16-bit (High Color), 24-bit, or 32-bit (True Color) recommended
Screen resolution	At least 1024x768

Operating Systems

• Windows XP Professional 32-bit Service Pack 3 or later
• Windows Vista 32-bit or 64-bit with Service Pack 2 (as 32-bit application)
• Windows 7 32-bit or 64-bit with Service Pack 1 (as 32-bit application)
• Windows 8.1 32-bit or 64-bit (as 32-bit application)
• Windows Server 2003 R2 32-bit with Service Pack 2
• Windows Server 2008 R2 64-bit with Service Pack 1 (as 32-bit application)
• Windows Server 2012 R2 64 Bit (as 32-bit application)
  
  

Note  DIAdem runs only with restrictions on the N or KN edition of Windows because the multimedia support is missing. You can obtain this as "Media Feature Pack" from Microsoft and install it later.
Under Windows Server 2012 R2 64-bit you cannot play videos in DIAdem VIEW.
Administration

Firewall

The firewall displays warnings while DIAdem installs and while DIAdem launches, for the following reasons: The usireg component executes during the installation of DataPlugins. The DataFinder, which you use for searching and navigating in files, then starts. When DIAdem launches, a DNS query determines whether to license locally or whether to use a license server. If you want to be able to use all the DIAdem functions, National Instruments recommends that you select "Do not block" for all programs listed. This also applies when you want to evaluate DIAdem. Refer to ni.com/info under the info code winxpsp2.

Windows User Rights

DIAdem and its components are basically executable under the preconfigured Microsoft Windows user accounts from User upwards. DIAdem must be installed with complete administrator rights. If you operate various DIAdem versions on one computer, you only have the entire range of functions in each version if you have administrator rights.

Miscellaneous

• Internet Explorer
• If you want to display maps in the panels VIEW and VISUAL with Microsoft MapPoint, you must install MS MapPoint version 2010 and later.
• Recommended:
  - Adobe Reader to display manual files
  - Adobe Flash Player for Microsoft Internet Explorer to display the tutorials
  
  

Notes on DIAdem 2014

• DIAdem Version 9.0 and LabVIEW Version 7.1, and later versions, use a shared software component that is updated when you install DIAdem. When you uninstall DIAdem, the current version of the shared component remains. This is intentional and has been tested extensively.
  The installation functions were tested parallel to earlier DIAdem versions down to DIAdem 11.0.
• For the DataFinder in DIAdem 2014, any index files from earlier DIAdem versions must be regenerated. This occurs automatically when you launch DIAdem. Depending on how many files are to be indexed, this may take quite some time.
• It is strongly recommended that you install DIAdem in the suggested folders on Windows Vista or later Windows versions, or that you specify the folder exclusively in the path selection dialog box in the setup program. In particular, changing the suggested program path manually in the installation program can cause problems in DIAdem.
• When executing DIAdem or DIAdem scripts under Windows Server 2003, runtime errors might occur due to an error in the runtime library of the system. As a workaround, Microsoft has provided a hotfix which you can download at http://support.microsoft.com/?scid=kb%3Ben-us%3B955536.
• To activate DIAdem 2012 and later versions, you must create a user profile on ni.com. The evaluation period is now 7 days without a user profile. If you create a user profile, this period is extended by an additional 45 days.
• Previously the path for graphic displays (MediaWritePath) was synchronized with the document path by default. From DIAdem 2014, a media file, such as a PDF, can be saved in any folder without changing the other paths. Select Settings»DIAdem Settings»Select Path to switch this behavior to the extended path behavior.
• The GFSODBC.DLL is not registered by default in the DIAdem GPI registration. You can register the DLL manually over the GPI registration. However, we recommend you use the ADO interface to access databases in VBS. Refer to the help files for more information.
• The following changes were made in order to align the DIAdem VIEW interface with the REPORT interface:
  
  • The ContourCurves collection was renamed CurvesContour.
  • The Curves collection was renamed Curves2D.
  • The properties CurrCurve, LeadingCurve, and SetLeadingCurve were moved from View.ActiveSheet.ActiveArea.DisplayObj into the curves collection of the respective display type.
    The previous names and properties are still available so that scripts can still run, however auto-completion by the script editor is no longer available.
    
• In DIAdem-ANALYSIS, the Linear Mapping function was moved from the Curve Fitting bar to the Channel Functions bar.
• In DIAdem DAC the menu item Insert»Display Instruments»Display in DIAdem INSIGHT was removed.
• When loading a DAC block diagram, DIAdem now checks whether the block diagram contains outdated blocks. The block diagram can still run with these blocks, however the outdated blocks are identified with a label. Please replace these with current blocks.
  
  In addition, the DLL 'GfSPack4.DLL' is no longer registered automatically. If an existing block diagram uses blocks from this DLL, the loading of the block diagram already leads to an error message, which prompts the user to register the DLL manually over the GPI registration. Only after this registration can such a block diagram run again.
• In order to use the following DIAdem drivers the following NI software components must be installed:

  Driver	Components	Version
  ADCS	Automotive Diagnostic Command Set	>= 1.1.1
  DAQmx driver	NI-DAQmx	>= 9.4
  ECU MC	ECU Measurement and Calibration Toolkit	>= 2.3.1
  XNET	NI-XNET	>= 1.3.0

• In DIAdem SCRIPT the AUT/VBS converter can no longer be requested from the interface. It can still be started with the AUTToVBS script command.
• The outdated command ChnGet() is labeled obsolete in the DIAdem Help. It still works in DIAdem 2014 but will be omitted in future versions.
• The map display in the VIEW and VISUAL panels supports the Microsoft software MapPoint 2010 and later. Microsoft has announced to discontinue the development and sales of MapPoint by December 31, 2014, which may result in MapPoint not working in future DIAdem versions.
  

Compatibility of DIAdem 2014 SP1 to DIAdem 2014

• The optional timeout parameter of the ConnectDataFinderByParameter command is now specified in seconds (previously milliseconds). If you want to use these parameters in scripts, you must adapt these scripts.
• The ANALYSIS function Sort Channel Values and the associated script command ChnMultipleSortExt now use a robust sorting algorithm so that the order of consecutive identical values does not change.
  

Compatibility of DIAdem 2014 to DIAdem 2012

• From Version 2012 SP2, the file, group, and channel properties with the names registertxt1 ... registertxt3, and the channel properties registerint1 ... registerint6, and registerval1 ... registerval6 are no longer indexed. These properties are no longer available for search queries.
• The local "My DataFinder" can no longer be shared for remote access. For these scenarios please use the DataFinder Server Edition.
• The algorithm for how DIAdem REPORT specifies the display of curves when group references are not explicit, has changed. This may lead to the modified display of existing layouts. You can modify this behavior with the "REPORT channel references refer to the structure view of the Data Portal" setting in the Compatibility dialog box. For more details refer to the "Compatibility" section in the help.
• The REPORT text object has been revised and rarely used methods and functions were removed. These include paragraph formatting function and the support of objects of other applications such as pictures or Excel tables. The following functions also no longer work:
  TxtBufOpen()
  TxtBufClose()
  TxtBufShow()
  TxtBufFontAttr()
  TxtBufTextSearch()
  TxtBufNextLine()
  TxtBufLineSelect()
  TxtBufTabCellSet()
  TxtBufRGBSet()
  TxtBufHSISet()
  TxtBufBackHSISet()
  If you have further questions about the functions of the text object, please contact our support.
• VBS code for opening a REPORT dialog box in the old script syntax can no longer run. You must convert the request to the new API.

  Old:	GraphObjOpen("2D-Axis1") Call SudDlgShow("Main",ResourceDrv&"D2Axis.SUC") GraphObjClose("2D-Axis1")
  New:	Report.ActiveSheet.Objects.Item("2D-Axis1").ShowPropertiesDlg

• If a curve transformation is used in a REPORT layout, the "Curve Transformation" dialog box was overloaded, and variables, which require the previous call of GraphObjOpen, such as, for example, CurveNo, are accessed within this dialog box, you must now call GraphObjOpen within the user dialog box.
  Add the following line at the beginning of the script:  Call GraphObjOpen(CurrMainObjectName)
  Add the following line at the end of the script:
    Call GraphObjClose(CurrMainObjectName)
• From DIAdem 2014, performance reasons require a modified algorithm for deleting a channel group. The algorithm might cause a change in the channel numbering of newly created channels. If the recommended channel reference by name or index is used, no changes occur.

  The following commands are affected:

  GroupDel(...) Data.Root.ChannelGroups.Remove(...) Data.Remove()

• The AutoTeachLstMode variable is obsolete and will no longer be supported in DIAdem 2015 and later versions.
• The script command DataFinder.Search(Query) returns an error if a non-indexed custom property is used in the query. In DIAdem 2012, 0 results were returned in this case.
• The DataFileHeaderAccess function is no longer supported. This command is no longer available in the current DIAdem version. Use the CreateDataFileHeaderAccess function instead. If you must continue to use this outdated command, refer to the KnowledgeBase under the term DataFileHeaderAccess for further information.
  

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.

New Features in DIAdem 2014General

Double-click on the right side of the worksheet tab on the bottom in the panels DIAdem VIEW, DIAdem REPORT, and DIAdem SCRIPT to create a new page.

The configuration dialog boxes of all DIAdem modules were combined to one joint dialog box.

The dialog box that refers to files that were not saved when you exit DIAdem has been revised.

DIAdem NAVIGATOR, DataFinder, Data Portal

DIAdem now supports assignment channels, which assign texts to values or value ranges in the channel properties.

The first column of the search results list can be loaded in the context menu.

The setting "Reset Column Width" was added to the context menu of the search results.

The function for reduced loading - context menu Data Reduction - defines data sections.

The DataPlugin wizard supports the combination of a date and a time channel.

A user-defined property can be deleted or renamed in the context menu in the Data Portal.

The Bus Log Converter can now convert the IOS file format from IOSiX, however, the converter only includes the CAN bus logfiles and the GPS data.

DIAdem VIEW

DIAdem VIEW offers the new display types Bode, Polar, Orbit, and Shaft Centerline.

Curves can be temporarily deactivated in 2D axis system.

Constants can be defined in 2D axis system.

An individual axis scaling with individual curve assignments was added to the displays n Y-Axes and n Systems.

The 2D axis system now also supports harmonic cursors and sideband cursors.

Columns can be locked in channel tables. These remain visible when you scroll over the columns.

If you drag and drop a channel from the Data Portal into a channel table, which displays all channels, the columns are positioned in such a way that this channel becomes visible.

DIAdem VIEW supports the Media Foundation for the display of videos.

DIAdem ANALYSIS

The Integration function provides two integration methods.

The new channel function Numeric Channels <-> Assignment Channels creates assignment channels from numeric channels, waveform channels, and text channels and vice versa.

The new channel function Wrap / Unwrap Phase processes jumps in a channel.

The new channel function Resampling maps signals on another frequency range or with an interpolation channel.

The channel function Sort Channel Values now supports several control channels for a staged sorting of channels.

The new function Frequency Weighting (A-, B-, C-Filtering) executes a frequency weighted filtering of noise signals.

The setting Calculate both sides was added to the Cross Correlation function.

The new function AC/DC Coupling removes the bias from a signal.

The Full Spectrum FFT calculates various FFT analyses for vibration sensor signals. Initially the analyses are separate and then the spectra are combined to a complex FFT.

The new function Pulse Detection analyses and corrects tachometer signals.

The new function Order Analysis for Bode Display calculates the amplitude and phase of certain orders for vibration sensor signals.

The Shaft Centerline function calculates the movements of a rotating shaft in the bearing box.

DIAdem REPORT

In the layout REPORT objects can be aligned with a grid.

The curve expansion now also supports channel groups.

Every dialog box in DIAdem REPORT has a preview to show the settings made in the layout.

The format setting hhh displays time data as hours including those that are greater than 24 hours.

If you disable the setting Allow interactive rotation, you can fixate the axes in 3D axis systems.

Partial load structure displays and hyperbola displays were added to the Characteristic Diagram which now supports automatic labeling of the isolines along an imagined line.

In 2D tables you can now define different background colors for columns and rows and format cells event-driven.

DIAdem DAC/ DIAdem VISUAL

The NI ECU Measurement and Calibration Driver was revised and now offers a new configuration dialog box.

The Script Driver was revised and an interrupt-controlled measurement was added.

The FFT calculation in packet processing now supports any block size.

The new display instrument Map Display displays the measured GPS signals with a position pointer and a track in the map.

DIAdem SCRIPT

Complex tasks can be distributed to different processor cores with the multicore scripting function. In this case, so-called DIAdem workers take over the processing of individual task sections.

A curve preview can now display 2D graphics in SUD dialog boxes.

Bug Fixes

The following items are the IDs and titles of a subset of issues fixed in DIAdem 2014 SP1. This is not an exhaustive list of issues fixed in the current version of the DIAdem. If you have a CAR ID, you can search this list to validate that the issue has been fixed. The DIAdem Knowledgebase contains a list of fixed issues from earlier DIAdem versions under the search term Fixed Issues.

CAR ID

Description

General

480460	The new display types "Bode", "Orbit", and "Shaft Centerline" in VIEW and some new functions in ANALYSIS can already be used in the Base edition as well as in the Advanced or the Professional edition.
482045	If only the DAC kit or DAC bundle are enabled, the DIAdem settings dialog box displays error messages.
487341	In the display dialog box of the VIEW display type contour and in the dialog box of the 3D curve parameters in REPORT the color values of the contour values are sometimes not displayed.
487837	In the Japanese version the menus cannot be used in all operating systems.
489851	If DIAdem is started out of Citrix, the parallel processing does not work.

Data Portal

483570	If you want to rename a custom property in the Data Portal, it is not possible if the custom property has the value NoValue.
492554	It lasts a long time to open a large amount of channel groups in the Data Portal.

NAVIGATOR

481884	If a FIBEX cluster only contains PDUs, Bus Log Converter aborts the conversion with an error message.
491751	You must specify the timeouts in milliseconds instead of seconds in the ConnectDataFinderByParameter command.
495318	If you register scaled channels of a DAT file containing NoValues or load them with the loader "Load bulk data when changing channel data" and then save them as a TDM file, the saved channels are not complete.
498753	The files created by the DataFinderIndexJobFileCreate command are corrupt.
507302	The Bus Log Convertor cannot find the frames if the assignment occurs over the PGN of the Canld in a signal description file.
508059	You can no longer operate the MyDataFinder if you upgrade the MyDataFinder when its configuration contains folders or files excluded from the search.
508088	If the Selection property for ResultsList is called several times, the program might crash.

VIEW

479330	In the display types "Orbit" and "Shaft Centerline" DIAdem only displays the free text in the legend if you specify 0° for the angle of the x-sensor and 90° for the angle of the y-sensor.
480883	If you change the sensor angle (not equal to 0° and 90°) in the display types "Orbit" and "Shaft Centerline" in order to rotate a curve and then hide this curve, the legend displays the original channel values instead of hiding these values.
485883	In 2D axis systems DIAdem cannot display logarithmic axis scalings for the x-axis.
489243	If you change the size of the text displayed on the screen (DPI scale), for example, from 100% to 150%, under Windows 8.1 and you do not restart the computer, additional curves might be displayed in 2D axis systems.
493783	If you add a non-existing channel to a 2D axis system in a script, DIAdem crashes.
505342	If you add several curves, the automatic color count in a 2D axis system does not work.
507525	If the input channel for the orbit display type contains NoValues, DIAdem does not center the curve.

ANALYSIS

464992	The ChnOrderBodeCalc command does not display the result channels in the DIAdem specific order.
480031	The "Sort Channel Values" dialog box does not show whether the control channels will be sorted. In addition it is not possible to sort a single channel because at least one more channel must be specified for sorting.
496974	In the "Phase unwrap" function the first result value and all following values are determined with an incorrect y-offset. Therefore the result channel is shifted by an offset.
499169	When subtracting two channels, an access violation occurs if the second channel contains no values.
500991	Linear mapping calculates inaccurately with absolute time values or other large x-values.
508013	In the Resample dialog box, you cannot enable the anti aliasing filter.

REPORT

478034	DIAdem ignores the setting "Portion of symbol field" in the dialog box "Legend: Size".
479077	In 2D tables DIAdem ignores the sorting of expanded curves.
479078	Sometimes DIAdem plots texts with expression multiple times.
479319	DIAdem does not evaluate DIAdem expressions in earlier layout files with text objects correctly.
479328	In the "Curve and Axis Definition » Y-Scaling" dialog box of a 2D axis system in REPORT you cannot set the parameters for additional y-axes if you select manual scaling.
479802	If you click the button with the three dots next to the unit setting in the "Curve and Axis Definition : Axis Parameters » X-Scaling" or "Y-Scaling", DIAdem reported a message if you did not enter a unit and did not define a curve.
480707	DIAdem does not save the value for the manual gradation of a hyperbola of a 3D characteristic diagram with the layout.
484040	The predefined settings of the graphics dialog box in DIAdem REPORT are not available.
484084	If you have many points, the display of a 3D characteristic diagram takes too long.
484339	If move lines in the "3D Axis Definition" dialog box with "Move Entry Up" or "Move Entry Down" and then change a channel reference, the channel assignment is incorrect.
484761	In layouts which use 3D isolines with curve expansion errors might occur in the curve labeling texts.
484796	In special cases the curve dialog box of an expanded 3D curve displays an error message.
486063	Sometimes the isolines in the characteristic diagram are not displayed smoothed.
486736	If you change from automatic to manual axis scaling in a 2D axis system display and close the "Curve and Axis Definition" dialog box with "Cancel", the manual axis scaling might be lost.
486913	If a curve in a 2D axis system contains only one point, DIAdem does not scale the y-axis correctly in the automatic scaling mode.
486948	The setting "Same color as label" cannot be used for the marker color in the characteristic diagram in DIAdem REPORT.
488266	In a 3D axis system with characteristic diagram and partial load DIAdem does not map the convex hull completely.
493988	In 2D axis systems with curve expansion, which use the expansion color table, DIAdem does not execute the OnAxisSystem2DCurve for DrawingEvents properly.
495536	If you select several objects and shift them with the arrow buttons, the objects are offset. Rotated text cannot be aligned correctly.
505658	In a 3D axis system with a differential characteristic diagram DIAdem displays the minimum and maximum value incorrectly.
505945	If channels with different x-ranges are assigned to sub-axes in a 2D axis system with sub-axes and automatically scaled x-axis, DIAdem scales the display incorrectly.
505953	In a 3D axis system with a characteristic diagram and partial load structure DIAdem displays the y-value of the mean partial load values incorrectly.
506627	The functions for horizontally and vertically aligning the text margins might change the order of the objects.
507082	Additional y-axes in 2D axis systems can be reduced but not enlarged or shifted vertically.
507089	If you cancel the settings dialog box of a 2D table, the font settings might change.

DAC

479351	You cannot connect a control bus to the "Save in Variables" block.
490835	In one of the dialog boxes of ECU, the list of selection terms for the transport layer is incorrect in the English and Japanese version.
490878	If you use several DSA boards, the synchronization does not work in measurements with the NI-DAQmx driver.
493010	If you assign an existing block name to a block, DIAdem does not display an error message and keeps the old name.
496759	In a display without a frame, the digit display displays the measurement values with digits that are too small.
499370	If a measurement is started with the ECU-MC driver, DIAdem does not overwrite the communication parameters from the A2L file (CAN, TCP/IP, UDP) with the parameters specified in the dialog box. You cannot change the station address (CCP) either.
504835	Under certain circumstances DIAdem does not read in the result list of the ECU correctly after a A2L file is changed.
508259	In the ECU Measurement and Calibration Toolkit driver, DIAdem transfers a manually set IP address wrongly to the toolkit.
508260	On Windows XP you cannot open the dialog box to select an A2L file in the ECU Measurement and Calibration Toolkit if no A2L file was entered previously.

DataPlugin

484563	If you specify a start position in the Find for Sheet method, DIAdem may crash.
505912	The BitMask property for BinaryChannelFormatter always returns the value -1 for negative values.

The following items are the IDs and titles of a subset of issues fixed in DIAdem 2014. This is not an exhaustive list of issues fixed in the current version of the DIAdem. If you have a CAR ID, you can search this list to validate that the issue has been fixed. The DIAdem Knowledgebase contains a list of fixed issues from earlier DIAdem versions under the search term Fixed Issues.

CAR ID

Description

General

397167	DIAdem does not export WMF files as placeable WMF files.
402973	DIAdem does not convert date/time values which contain time information that are before 12/30/1899 correctly from the DIAdem time format into the VBS time format.
403684	DIAdem does not always load the newest installed LabVIEW Run-Time Engine when initializing the LabVIEW Run-Time Engine with default parameters.
413440	The version information for the script engine and the debugger contains a comma instead of a point in front of the build number.
415377	If a channel name contains the % character, the program might crash when a channel property is dragged and dropped from the Data Portal onto a panel.
420518	If a TUC file for the definition of a unit set contains units whose names contain one or more commas, DIAdem cannot read this file.
425087	The "DIAdem PDF Export" printer does not use the specified margins.
443285	If you access the value of a channel in a REPORT table or with the Cht command and the value is larger than the maximum channel length, you do not receive an error message but the value NoValue.
460887	If you are working with two or more monitors arranged on top of each other and have specified this in the screen display settings of your operating system, DIAdem hides the Data Portal when you switch panels if DIAdem is on the upper monitor.
464451	If you generate a long time channel in the time unit milliseconds with the ChnGenTime command and save it in a TDMS file, this channel deviates from the originally generated channel in the millisecond range when it is loaded.

Data Portal

381807	If the Data Portal contains many channel groups, deleting the top channel groups is slow.
462640	DIAdem does not always process 2-byte digits at the end of a channel name correctly.

NAVIGATOR

367100	When Vector log files with the filename extension .mdf are converted with the Bus Log Converter, the generated values of the time channels are a factor 10 to low.
368184	The Bus Log Converter does not support the logfile format KVASER.log.
375356	When PCAN Trace files from version 10.3 are converted in the Bus Log Converter, the program might crash if records have more than 8 data bytes.
382995	When the loading parameters are missing, the LoadData() command uses the loading parameters of the data store open in NAVIGATOR without checking whether the elements to be loaded originate from this data store.
390999	The LoadChannelByName() command always refreshes the Data Portal even if the refresh mode was disabled with the UIAutoRefreshSet() command.
393772	The Bus Log Converter returns the ID of a frame as group property only if the ID is a decimal display.
403222	The DataPlugin Text Wizard does not load date/time information with AM/PM correctly.
403391	You cannot load elements derived from AoTest or AoSubtest from the search results list of ASAM data stores.
409302	The DataFinder generates additional tdms_index files for TDMS files even if no tdms_index files existed previously.
415743	DIAdem only loads the first element of multiple selections of aoTest type elements or aoSubTest type elements from the data stores into the Data Portal.
421487	The Excel DataPlugin Wizard cannot read XLSX files which contain empty cell tags () within a definition, for example, .
425293	If DIAdem NAVIGATOR is closed, the return value of the Navigator.LoadProperty() method is not filled.
435433	If you convert a Vector-ASCII file with decimal normal and extended IDs with the Bus Log Converter, DIAdem marks from the first extended ID all IDs as extended.
436609	The Bus Log Converter cannot open certain FIBEX files.
436623	If the first cells of an Excel table are empty, the Excel DataPlugin wizard cannot always specify the data type of a channel correctly.
436689	Search queries for data stores cannot be extended with drag and drop from the Data Portal.
463861	Only the first column in a search results list might be visible and it might be impossible to scroll to further columns.
468795	You cannot save DAT files as Real32 or Real48 data types if the DAT file contains NoValues.
469724	If data is saved in ATFX format, an instance attribute with the same name is exported in addition to the PropertyID.

VIEW

336519	In logarithmic display, 2D axis systems cannot be scaled below the curve minimum.
374295	If scrolling in the cursor range in the layout is enabled for at least four 2D axis systems and the arrow keys are used for scrolling, the program crashes.
399937	If you want to display dynamic isolines in a contour display in the full screen mode, the program crashes.
411276	The cursor does not always move evenly in 2D axis systems if the x-channels are monotonic falling.
413171	If an x-axis is zoomed a lot, DIAdem might label all ticks the same.
418748	In a contour display the width of the legend columns cannot be changed.
446319	Reducing the points of a track does not work optimal when a map display is zoomed.
476530	In the dialog box of the map display the maximum zoom level is 18, even though there are up to 19 zoom levels.

ANALYSIS

359813	If the peak value or time-at-level classification methods are used, rounding errors occur which result in incorrect assignments and results if one class limit is 0 and the values are classified between -1E-16 and -1E-18.
360320	The ChnPeakDetect command does not check whether a x-channel is monotonic rising.
360650	In some cases you cannot select the setting "Create index channel" in the FFT dialog box with a time signal.
362549	In the English and Japanese version of the "Find Peaks" function, the search criteria Maxima and Minima are reversed.
363402	If you execute a crash calculation which creates new custom properties at the input channel, DIAdem does not display these new properties directly in the properties window.
368399	The ChnPeakDetect command does not check whether NoValues exist before executing, but aborts the calculation without an error message about NoValues when the signal contains NoValues.
371903	The THIV calculation (Theoretical Head Impact Velocity) returns incorrect results when the distance between head and centre of gravity is not equal zero.
375146	The order analysis in the time domain divides the start value and the end value into incorrect rpm steps when the "Reduction according to RPM" setting is enabled.
378827	In the English version there are errors when executing the calculation template Calculation_Example.tca. The associated dialog box to edit this calculation cannot be opened.
452506	If the last values in the y-channel are constant, linear mapping calculates incorrect values.

REPORT

251342	If you move several objects several times, the object positions are imprecise.
350860	In a number-oriented layout, DIAdem deletes x-channel entries if these entries were created with the object-oriented script interface and the dialog box of the 2D axis system was exited with cancel.
366035	If the start value and end value of a scaling are the same in a 2D axis system, the display can only continue if you press ESC.
375177	If you use the object-oriented API to add a subaxis to a 2D axis system in a script, the program might crash.
378351	After exporting a PDF, DIAdem sets the default printer to "DIAdem PDF Export".
378384	Printing PDFs does not work if no free printer port or LPT port is available.
380997	If you select the scaled setting and the user-defined setting as page size, DIAdem ignores the specified page ratio and uses instead the default page ratio.
383000	If you use the %(/yPosition) setting, DIAdem does not position the points in 3D axis systems correctly.
383216	Sometimes, DIAdem does not plot isolines in a 3D axis system.
398184	If you select the text position "Centered and clipped", DIAdem does not display the curves in the display mode "Line and points" in a 2D axis system.
399754	DIAdem does not always display all columns in the legend of a 2D axis system if you deleted other columns before.
399756	If you select several objects of which at least one object has a fixed height/width ratio, you can only change the group size with a fixed height/width ratio.
404582	If values were deleted from a channel, the 2D table display does not check the current channel length of text channels and displays too many values.
408645	2D axis systems do not support the VU function as x-constants.
422835	Display errors might occur when reports are zoomed.
423844	Incorrect channels assignments might occur in 2D axis systems.
425330	Depending on the selected line width, DIAdem does not print very narrow rectangles.
427655	If you exit a REPORT dialog box with "Cancel" or use the "Undo" function, DIAdem deletes the TagTemporary property.
429778	If you try to set the frame of a master layout into the foreground, the program crashes.
435410	If you use channels with the length 0 in a characteristic diagram display, the display is incorrect and the program might crash.
435444	DIAdem does not highlight curves that protrude the axis if you move the mouse over them.
435984	In the expanded mode in 2D axis systems, DIAdem ignores the setting "Display curve".
438720	The double-click might not work in a report.
456413	DIAdem does not save the legend position correctly if you use the setting "Bound to axis system".
365690	DIAdem might create invalid channel references in the curve transformation in a 2D axis system.

SCRIPT

377669	The ASCIIBlockLoad() command does not load all values from a text file.
383205	The DirLstGet() command returns an error during the recursive search if the function encounters a folder that only contains other folders.
402226	If you specify an output format, rounding errors might occur during the conversion of numbers with the Str function.
402970	The RTT function cannot convert vbDate values which contain fractions of seconds.
416125	The FileNameGet command does work if the selection lists for filename extensions are very long.
426071	The Round method cannot calculate quantity based.
428636	The functions NotB, SHR, SHL, GetB, and SetB accept a negative bit index and ignore prefixes.
428989	The DataPlugin script function Workbook.Sheets.Exists() always returns TRUE, even if the worksheet does not exist.
436760	DIAdem might crash if the LabVIEW Run-Time Engine is initialized and deinitialized several times in a script.
442154	In the scaled display, DIAdem REPORT changes the properties Top and Right when changing the properties Bottom and Left with the object-oriented interface.

DAC

364919	Auto scaled displays or displays with interactively changeable y-scaling ranges do not display measurement values if a preceding scaling block contains negative slopes.
365260	If several script blocks use the same script in a block diagram, the scripts might influence each other.
370297	When a measurement starts or ends with the block PC loudspeaker, an error message might occur under Windows 8 (32 Bit).
373511	In the ECU MC driver dialog box, DIAdem does not arrange the signals according to their function or sub-function.
392828	If you start a block diagram with an AUT script block which does not contain a valid AUT file, you cannot use DIAdem afterwards.
394106	The parse function of the script driver returns an incorrect value for ASCII characters over 127.
397179	Measurements which save data directly in the Data Portal generate too many channel groups if the settings "With section creation" and "Use new channels for every measurement" are used.
403725	In measurements with a software clock with the NI DAQmx driver, the first measurement value is NoValue.
405947	If you try to measure different bus systems in the same DAC clock system in the XNET driver, DIAdem measures only the channel from the first bus correctly.
406245	During long-term measurements with the NI-CAN driver in the single point mode the buffer on the CAN board might overflow.
406513	The program might crash if you double-click a bus or a block terminal of a subblock diagram.
411275	When the filenames are generated automatically, the DAC storage block always saves the measurement data in files which start with DACDATA.
411277	If you start measurements very often under Windows 7, DIAdem might not be able to execute commands.
411471	When you start a measurement with the NI-DAQmx driver, sporadic error messages from the synchronization manager might occur.
421483	DIAdem displays numeric and table displays even if the setting is "No color".
429777	The digit and table display in VISUAL ignores the selected background color if you disable the frame around the values.
432292	Under Windows 8, the size of the VISUAL window might change during a measurement.
436640	The dialog box for the "Numeric Input" block cannot be opened.
449635	The program crashes, if you measure or output the same signal several times in a measurement with the NI DAQmx driver.
456771	The XNET driver does not always save the setting for the bus termination of CAN and LIN.
462684	When loading a block diagram, DIAdem renames a block that has a base name if this block diagram contains a second block with the base name and the postfix 0.
462719	The packet blocks for frequency weighting and level calculation do not function correctly when the unit for the x-values is missing in the data packets. If the unit is missing, the blocks will assume the x-values are in seconds in future versions.
469599	In the offset correction block, DIAdem displays an error when an input signal is not active.

Accessing the Help

For more information on DIAdem, go to the DIAdem help Help»Contents.

Finding Examples

Use Help»Examples in DIAdem to start the DIAdem ExampleFinder. You can find DIAdem examples in the examples directory below the program directory. You can modify examples to suit your needs, or you can copy and paste parts of the examples into your own files.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information, refer to the following KnowledgeBase articles:

• Refer to KB 4CJDP38M, Automating the Installation of a Single Installer for more information on automatic installations of individual NI products.
• For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
• Refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer? for a description of the version of the NI Installer your product contains.
  

How to Use NI Software with Microsoft Windows 8.x

When you install National Instruments software on Microsoft Windows 8.x, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher.

Using NI Launcher

NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile in the Apps view. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.

Note  NI MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8.x. You can launch NI MAX either from the Apps view or from within NI Launcher.

Pinning Frequently Used Applications

For convenience, you can pin your most-used NI applications, such as NI MAX, to either the Start screen or the Taskbar on the desktop, as necessary:

Current Application	Icon Location	Pin to Action
Windows 8.x Desktop	Desktop Taskbar	Right-click application and select Pin to Taskbar
Windows 8.x Desktop	Start screen	Right-click application and select Pin to Start
Windows 8.x Start screen	Desktop Taskbar	Right-click application and select Pin to Taskbar from the menu bar on the bottom of the screen

Finding All Programs

If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files from the Apps view. To get to the Apps view, right-click anywhere on the Start screen and select All Apps (Windows 8) or click the down arrow on the bottom left of the screen (Windows 8.1).

For more information about NI support for Windows 8.x, visit ni.com/windows8.

NI DIAdem Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016

As of July 1, 2016, NI DIAdem will no longer support the operating systems Microsoft Windows Vista, MS Windows XP, and MS Windows Server 2003. Versions of DIAdem that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:

Product	Info Code
NI LabVIEW	lifecycle
NI LabWindows™/CVI™	cvi_lifecycle
NI Measurement Studio	mstudiolifecycle
NI TestStand	tslcp
NI DIAdem	ddlcp
NI SignalExpress	selcp
NI VeriStand	nivslifecycle

Legal Information

Copyright

© 2003—2014 National Instruments Ireland Resources Limited. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, This includes photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

• Legal notice: Notices are located in the \_Legal Information and directories.
• EULAs: EULAs are located in the \Shared\MDF\Legal\license directory.
• Information on including legal information in installers built with NI products: \_Legal Information.txt
  

U.S. Government Restricted Rights

If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.

IVI Foundation Copyright Notice

Content from the IVI specifications reproduced with permission from the IVI Foundation.

The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.