NI-DCPower Driver 1.6.1 Win32/64Eng NI DC电源仪器驱动程序下载1.6.1

石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI-DCPower Driver 1.6.1 Win32/64Eng NI DC电源仪器驱动程序下载1.6.1

NI-DCPower
NI-DCPower为使用NI DC电源和源测量单元(SMU)的客户提供支持。
NI-DCPower是与所有NI可编程电源和SMU进行通信必需的NI仪器驱动程序。NI-DCPower是一种可兼容可互换虚拟仪器(IVI)的仪器驱动程序，提供一系列操作和属性，可以执行波形或信号发生器的功能，并包含交互式软件前面板和示例。

1.6.1
文件大小: 1476447778 字节 (1.38 GB)
修改日期: 2011-10-28 06:40
MD5: f9255f20948b834b31b58a56808529d7（官方正确）
SHA1: 60ef8e7b9812b3e9acf4eec8f0b20b9189006e48
SHA256: 476040e9995ea423152f6643e56fdb0838e04240590fef25e7fa0269e056d8fe
CRC32: c5b7b861

DCPower1.6.1.txt (261 Bytes, 下载次数: 0, 售价: 10 元)

2020-10-16 23:54 上传

点击文件名下载附件

NI-DCPower Readme

Version 1.6.1

---

Thank you for using NI-DCPower. This file contains important information about NI-DCPower and is organized into the following sections:

• New Features
• Supported Hardware
• System Requirements
• Installed File Names and Locations
  
  • Software
  • Documentation
  • Examples
    
• Uninstalling/Modifying NI-DCPower
• Known Issues
• Bug Fixes
  

---

New Features in Version 1.6.1

• Support for LabVIEW 2011 (32-bit) and LabVIEW 2011 (64-bit)
• Support removed for LabVIEW 8.5.1
  

New Features in Version 1.6

• Support for NI PXIe-4140/4141
• Support for new signal routes added to the NI PXI-4132 (Source Complete event to Measure trigger) and the NI PXIe-4140/4141/4154 (Measure trigger to Source trigger, Source trigger to Measure trigger, and Source Complete event to Measure trigger)
  

New Features in Version 1.5

• Support for NI PXIe-4154
• Support for channel-based sessions
• Support for measure records
• The NI PXI-4132 now supports streaming sequences, allowing the size of a sequence to be virtually unlimited.
  

New Features in Version 1.4.1

• Support for LabVIEW 2010 (32-bit and 64-bit)
• Support removed for LabVIEW 8.2.1
  

New Features in Version 1.4

• Support for LabVIEW 2009 (64-bit)
• Support for NI PXI-4132
• Support for 64-bit user mode
  

New Features in Version 1.3.1

• Support for LabVIEW 2009 (32-bit)
• Support removed for LabVIEW 7.1.1
  

New Features in Version 1.3

• Japanese localization for driver, LabVIEW application programming interface (API), and documentation
• New behavior: Error and self-test message strings now return localized values in LabVIEW. User applications that check the value of these strings (or trap errors by comparing the error cluster) may experience a change in behavior.
  

Supported Hardware

NI-DCPower 1.6.1 and later supports the following power supply and source-measure units (SMUs):

• NI PXI-4110
• NI PXI-4130
• NI PXI-4132
• NI PXIe-4140
• NI PXIe-4141
• NI PXIe-4154
  

Note  MXI Express and MXI-4 are supported on Windows 7/Vista/XP, but MXI-3 is supported on only Windows XP.

System RequirementsSupported Operating Systems

NI-DCPower 1.6.1 and later supports the following operating systems:

• Windows 7 (32-bit and 64-bit)
• Windows Vista (32-bit and 64-bit)
• Windows XP Service Pack 2 (32-bit)
• Windows Server 2003 R2 (32-bit)
• Windows Server 2008 R2 (64-bit)
  

Note  NI-DCPower 1.6.1 and later does not support Windows Server non-R2 editions.

It is recommended that you have the most recent service pack for your operating system installed. Windows 2000 users must use NI-DCPower 1.4 or earlier.

Supported Real-Time Operating Environments

NI-DCPower 1.6.1 and later supports the following real-time operating environments:

• LabVIEW Real-Time Module
• LabWindows/CVI Real-Time Module
  

Minimum System

• Processor—Pentium III/Celeron 600 MHz or equivalent
• RAM
  
  • Windows XP: 128 MB
  • Windows 7/Vista: 512 MB
    
• Microsoft Internet Explorer 5.5 or later
• A screen resolution of 800 x 600 with 256 colors
• Windows 7/Vista/XP, with all available critical updates and service packs
  

Recommended System

• Processor—Pentium 4 or equivalent
• RAM
  
  • Windows XP: 256 MB
  • Windows 7/Vista: 1 GB
    
• A screen resolution of 1,024 x 768
• Windows 7/Vista/XP, with all available critical updates and service packs
• If you are running your application on an RT target, 64 MB of memory or more is recommended.
  

Application Development Environments (ADEs)

• LabVIEW 8.6.1, 2009 SP1 (32-bit), 2009 SP1 (64-bit), 2010 SP1 (32-bit), 2010 SP1 (64-bit), 2011 (32-bit), or 2011 (64-bit)
• LabVIEW Real-Time Module 8.6.1, 2009 SP1, 2010 SP1, or 2011
• LabWindows™/CVI™ 8.5.1 or later
• LabWindows/CVI Real-Time Module 9.0 or later
• Microsoft Visual C++ (MSVC) 6.0 or later
  

Installed File Names and LocationsSoftware

• is an alias for the following National Instruments file folder location:
  
  • Windows XP: Documents and Settings\All Users\Shared Documents\National Instruments
  • Windows 7/Vista: Users\Public\Documents\National Instruments
    
• is an alias for the following National Instruments file folder location:
  
  • Windows 7 (32-bit)/Vista (32-bit)/XP: Program Files\IVI Foundation\IVI\
  • Windows 7 (64-bit)/Vista (64-bit): Program Files (x86)\IVI Foundation\IVI\

    Note	$(IVIROOTDIR32) is configured as an environment variable on the target system.
    	If you upgraded an installation of IVI, your files may be located in the following location: Windows 7 (32-bit)/Vista (32-bit)/XP: Program Files\IVI\ Windows 7 (64-bit)/Vista (64-bit): Program Files (x86)\IVI\

    
    
• is an alias for the following National Instruments file folder location:
  
  • Windows 7 (64-bit)/Vista (64-bit): Program Files\IVI Foundation\IVI\
    Note  $(IVIROOTDIR64) is configured as an environment variable on the target system.
    
    
  
  

File Locations

Item	Installed Location on Windows 7/Vista/XP
NI-DCPower	\Drivers\niDCPower
NI-DCPower Function Panel	\Drivers\niDCPower\niDCPower.fp
NI-DCPower Examples	\niDCPower\Examples
NI-DCPower Header files	\Include
NI-DCPower Import Library files (32-bit)	\Lib
NI-DCPower Import Library files (64-bit)	\Lib_x64
NI-DCPower DLL (32-bit)	\Bin

Additional File Locations for Windows 7/Vista 64-bit

Item	Installed Location on Windows 7/Vista 64-bit
NI-DCPower Function Panel	\Drivers\niDCPower\niDCPower.fp
NI-DCPower Header files	\Include
NI-DCPower Import Library files (64-bit)	\Lib_x64
NI-DCPower DLL (64-bit)	\Bin

Documentation

Documentation is available at Start»All Programs»National Instruments»NI-DCPower»Documentation. The documentation set is composed of the following documents:

• NI-DCPower Readme
• NI DC Power Supplies and SMUs Getting Started Guide
  
  • Printed and PDF format. Contains hardware and software installation, MAX configuration, and signal connection information.
    
• NI DC Power Supplies and SMUs Help
  
  • HTML help format. Contains power supply fundamentals, hardware device overview, programming information, LabVIEW reference, and C/CVI/VB reference sections.
    
• NI DC Power Supplies and SMUs Specifications
  
  • Printed and PDF format. Lists specifications for NI DC Power Supplies and SMUs.
    
• NI DC Power Supplies and SMUs Calibration Procedures
  
  • PDF format. Contains calibration instructions for NI DC Power Supplies and SMUs.
    
• Maintain Forced-Air Cooling Note to Users
  
  • Printed format. Contains important cooling information for NI DC power supplies and SMUs.
    
• Read Me First: Safety and Electromagnetic Compatibility
  
  • Printed format. Contains safety instructions and electromagnetic compatibility (EMC) information for the hardware it accompanies.
    
  
  

Note  To view the specifications, you need to have Adobe Acrobat Reader installed. You can install the viewer from www.adobe.com/acrobat.

Examples

Refer to Start»All Programs»National Instruments»NI-DCPower»Examples for the examples for the supported ADEs.

Refer to the Installed File Names and Locations section for the installed locations of the example sets.

Uninstalling/Modifying NI-DCPower

For Windows XP, complete the following steps:

• Launch the Control Panel by selecting Start»Settings.
• Double-click Add/Remove Programs.
• Select National Instruments Software.
• Click Change/Remove.
• Select NI-DCPower 1.6.1 from the dialog box that appears.
• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

For Windows 7/Vista, complete the following steps:

• Launch the Control Panel by selecting Start»Control Panel.
• Double-click Programs and Features.
• Select National Instruments Software.
• Click the Uninstall/Change button.
• Select NI-DCPower 1.6.1 from the dialog box that appears.
• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

As part of the NI-DCPower installation, the following list of software was installed. To completely remove NI-DCPower from your system, you must remove all of these packages also.

• NI IVI Compliance Package 4.4
• NI Measurement & Automation Explorer 5.0
• NI-DAQmx 9.1.7
• NI-VISA 5.0
• NI Spy 2.7.2
  

Caution  Several of the software packages listed above are shared with other NI software packages. If you attempt to remove a piece of software that something else is dependent on, a message launches to warn you about the software dependencies. You can choose to either uninstall all of the software or to leave the shared software installed. If you choose to uninstall the shared software, some of your other NI software may no longer function correctly.

Note  Do not attempt to uninstall by manually deleting files.

Known Issues

You can access the software and documentation known issues list online. Refer to the NI-DCPower 1.6.1 Known Issues List web page on the National Instruments Web site for an up-to-date list of known issues in NI-DCPower 1.6.1.

Bug Fixes

The following items are changes in NI-DCPower 1.6 from NI-DCPower 1.5.

ID	Fixed Issue
283254	Warning 1073364993 is now returned instead of error -1074118605 if a measurement is taken while the device is performing a range change.

The following items are changes in NI-DCPower 1.5 from NI-DCPower 1.4.

ID	Fixed Issue
217333	The source delay attribute will be coerced to a minimum of 30μs on the NI PXI-4132.
178242	When handshaking on the NI PXI-4132 with other devices using the source trigger and measure complete event, the source trigger will no longer be missed.

---

Notice Regarding Microsoft Silverlight Installation and RedistributionInstalling Microsoft Silverlight

Some NI components require Microsoft Silverlight. If you do not have Silverlight installed on your computer, but you do have Internet access, you can download the installer from Microsoft at http://www.microsoft.com/silverlight/. If you do not have Internet access, you can install Silverlight from this NI distribution media.

Using Microsoft Silverlight

You may not use any H.264/MPEG-4 AVC and/or VC-1 technology or codecs included in or with Microsoft Silverlight software which may be provided by NI as Third Party Software, including for the purpose of encoding or decoding video in compliance with, or making use of, the H.264/AVC visual standard or the VC-1 video standard.

Redistribution of Microsoft Silverlight

If you create and distribute software applications that contain NI components that also use Microsoft Silverlight, you may be authorized to include Silverlight in installers or on physical media as long as you comply with certain requirements. Refer to the notice.txt file in the \_Legal Information\Microsoft Silverlight 4.0 directory or the NI standard End User License Agreement (EULA) located in the \Common\MDF\EULADepot\NIReleased directory for more information.

---

Copyright

© 2007–2011 National Instruments Corporation. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

Trademarks

LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.

Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.