注册登陆后可查看附件和大图，以及购买相关内容
您需要 登录 才可以下载或查看，没有账号？注册会员
x
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI-Industrial Communications for EtherCAT 21.5 x64Win10 32bitEng 以太网控制自动化技术工业通信软件21.5版下载
NI-Industrial Communications for EtherCAT
NI-Industrial Communications for EtherCAT提供了EtherCAT主站支持，以支持NI控制器硬件上的确定性I/O。
NI-Industrial Communications for EtherCAT为用户使用CompactRIO控制器、PXI控制器或工业控制器提供支持。使用此软件，您可以通过使用基于EtherCAT总线的CompactRIO机箱或使用远程I/O硬件来扩展I/O。NI建议结合经过充分测试和验证的NI EtherCAT产品使用此驱动软件。
21.5 Offline
发布日期：
2022/1/27
包含的版本：
21.5 完整版
支持的操作系统：
Windows 10 64-bit
Windows Server 2016 64-bit
Windows Server 2019 64-bit
语言：
English
应用程序位数：
32位
校验和：
文件大小: 924788736 字节 (881.95 MB)
修改日期: 2022-01-28 07:01
MD5: e9ab489859c1fbb53daa9c83a7688622（官方正确）
SHA1: 26245cd52d68a6201584f16fce74f35aecd198d3
SHA256: 013c35854e1a450e337bfbc0d98616e811b35a42fc5fd61973ccb8b0bffac460
CRC32: e82d68af
百度网盘和NI官方下载地址：
注册登录视觉论坛，购买附件查看下载地址
NI-EtherCAT 21.5.txt
(576 Bytes, 下载次数: 0, 售价: 10 元)
NI-Industrial Communications for EtherCAT® 21.5 ReadmeJanuary 2022 This file contains installation instructions and compatibility information for the NI-Industrial Communications for EtherCAT software. You can find more release information on ni.com.
OverviewThe NI-Industrial Communications for EtherCAT software provides an EtherCAT master driver to support the real-time EtherCAT network operations. Use the software with the LabVIEW Real-Time Module to configure the EtherCAT network and map the EtherCAT device signals to the LabVIEW I/O variables. Supported Operating SystemsThe NI-Industrial Communications for EtherCAT software supports the following operating systems: - Windows 10
- Windows Server 2019
- Windows Server 2016
Note The NI-Industrial Communications for EtherCAT no longer supports Windows Vista/XP/7/8.x, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. The NI-Industrial Communications for EtherCAT will not install or run on an unsupported OS. You cannot deploy or distribute applications that use the NI-Industrial Communications for EtherCAT to an unsupported OS. Additionally, after installing the NI-Industrial Communications for EtherCAT, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS. Software RequirementsTo install the NI-Industrial Communications for EtherCAT software, install the following prerequisite software. - LabVIEW 2018 SP1 or later
- LabVIEW 2018 SP1 Real-Time Module or later
- NI CompactRIO Device Drivers October 2021
Refer to the LabVIEW Readme for additional system requirements and supported operating systems for LabVIEW. Notes - NI 9145 is the only EtherCAT slave that has FPGA support in LabVIEW. To use the NI 9145 in FPGA Mode, install the LabVIEW 2014 FPGA Module or later on the host computer and then download a bitfile to the FPGA of the NI 9145. You can compile or copy a bitfile to download to the FPGA.
- NI 951x Series drive interface modules require the LabVIEW 2014 SoftMotion Module or later to work for EtherCAT.
|
Installation InstructionsDownload the NI-Industrial Communications for EtherCAT installer from ni.com/downloads. NI software includes NI Package Manager to handle the installation. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using Package Manager. The following table lists the supported EtherCAT masters and the earliest supported version of the NI-Industrial Communications for EtherCAT. EtherCAT Master | Earliest Supported Version | | PXI-8106 | 1.0 | | PXIe-8130 | 1.0 | | PXI-8104 | 1.0 | | PXI-8108 | 1.01 | | All real-time embedded PXI controllers with the PXI-8231 or PXI-8232 Ethernet interface | 2.0 | | PXIe-8133 | 2.0 | | PCI-8232 | 2.0 | | PCIe-8231 | 2.0 | | PCIe-8233 | 2.0 | | PCIe-8235 | 2.0 | | cRIO-9081 | 2.2 | | cRIO-9082 | 2.2 | | RMC-8354RT | 2.5 | | RMC-8355RT | 2.5 | | PXI-8109 | 2.5 | | PXI-8115 | 2.5 | | PXIe-8115 | 2.5 | | PXIe-8135 | 2.5 | | cRIO-9068 | 2.6 | | cRIO-9030 | 14.0 | | cRIO-9031 | 14.0 | | cRIO-9033 | 14.0 | | cRIO-9067 | 14.0 | | sbRIO-9651 | 14.0 | | cDAQ-9132RT | 14.0 | | cDAQ-9134RT | 14.0 | | PXI-8840 | 14.0 | | PXIe-8840 | 14.0 | | PXI-8119 | 14.0 | | PXIe-8119 | 14.0 | | PXIe-8880 | 14.0 | | cRIO-9034 | 14.5 | | cRIO-9035 | 14.5 | | cRIO-9036 | 14.5 | | cRIO-9038 | 14.5 | | cRIO-9039 | 14.5 | | cRIO-9064 | 14.5 | | cRIO-9065 | 14.5 | | cDAQ-9133RT | 14.5 | | cDAQ-9135RT | 14.5 | | sbRIO-9607 | 15.0 | | sbRIO-9627 | 15.0 | | cDAQ-9136RT | 15.0 | | cDAQ-9137RT | 15.0 | | CVS-1458RT | 15.0 | | cRIO-9032 | 16.0 | | cRIO-9037 | 16.0 | | cRIO-9035 (Sync) | 16.0 | | cRIO-9039 (Sync) | 16.0 | | IC-3171 | 16.0 | | IC-3172 | 16.0 | | IC-3173 | 16.0 | | cRIO-904x | 17.6 | | cRIO-905x | 18.0 | | PXIe-8840 Quad-Core with NI Linux Real-Time | 18.5 | | PXIe-8880 with NI Linux Real-Time | 18.5 | | PXIe-8861 with NI Linux Real-Time | 19.0 | | All PXIe controllers with NI Linux Real-Time with the PXIe-8245 or PXIe-8246 Ethernet interfaces | 21.3 | | sbRIO-9603 | 20.0 | | sbRIO-9608 | 20.0 | | sbRIO-9609 | 20.0 | | sbRIO-9628 | 20.0 | | sbRIO-9629 | 20.0 | | sbRIO-9638 | 20.0 |
Note NI does not recommend using cDAQ real-time controllers with the NI 9145 EtherCAT slave device in FPGA mode, because cDAQ real-time controllers cannot read user-defined variables from the NI 9145 EtherCAT slave device. When using a cDAQ real-time controller as the master device, you can only read EtherCAT device signals from the LabVIEW I/O Variable Functions. You cannot read directly from the LabVIEW I/O variables. Note If you use NI Measurement & Automation Explorer (MAX) to install the NI-Industrial Communications for EtherCAT software on real-time controllers, some controllers, such as the Embedded Vision System, require you to install the controller driver software. Otherwise, MAX cannot discover the controllers. Note In NI-Industrial Communications for EtherCAT 18.5, PXIe-8840 Quad-Core with NI Linux Real-Time and PXIe-8880 with NI Linux Real-Time are supported only for VeriStand. In NI-Industrial Communications for EtherCAT 19.0 or later, this support no longer relies on VeriStand. Note NI-Industrial Communications for EtherCAT 21.5 supports only the non-primary built-in Ethernet port of PXI controllers with NI Linux Real-Time. Accessing the HelpRefer to the NI-Industrial Communications for EtherCAT® Help, available by selecting Help»NI-Industrial Communications for EtherCAT from LabVIEW, for information about the NI-Industrial Communications for EtherCAT software. Finding ExamplesSelect Help»Find Examples from LabVIEW to launch the NI Example Finder. Navigate to the Hardware Input and Output»NI-Industrial Communications»EtherCAT folder to access the examples. You can also find the examples for NI-Industrial Communications for EtherCAT® in the labview\examples\indcomecat folder. Automating the Installation of NI ProductsYou can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software. For more information about automating the installation of NI products, refer to the following KnowledgeBase articles: Using NI Software with Microsoft Windows 10Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, refer to NI Product Compatibility for Microsoft Windows 10. NI-Industrial Communications for EtherCAT no longer supports Windows Vista/XP/7/8.x, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit https://www.ni.com/r/win32bitsupport.
Legal InformationCopyright © 2008–2022 National Instruments Corporation. All rights reserved. Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation. NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction. End-User License Agreements and Third-Party Legal Notices You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation: - Notices are located in the \_Legal Information and directories.
- EULAs are located in the \Shared\MDF\Legal\license directory.
- Review \_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies. IVI Foundation Copyright Notice Content from the IVI specifications reproduced with permission from the IVI Foundation. The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Trademarks Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. Patents For patents covering the NI products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
Credits This product includes components that use the Expat XML Parser. In regards to the Expat XML Parser, the following notice applies: Copyright © 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper. Copyright © 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. 374786P-01
| 
发表于 2022-3-8 10:39:57
