NI TestStand 2020 Semiconductor Module Win64Eng Teststand2020半导体模块扩展20.0.0

石鑫华视觉

NI TestStand 2020 Semiconductor Module Win64Eng Teststand2020半导体模块扩展20.0.0

TestStand Semiconductor模块
TestStand Semiconductor模块扩展了TestStand环境，可帮助您开发、调试、部署和维护半导体测试系统。
TestStand Semiconductor模块通过引脚/通道匹配、分箱、分选器/探针台驱动程序、限制值导入/导出和多站点编程，扩展了TestStand环境，可帮助您开发和维护半导体系统，包括晶圆级和最终封装测试应用程序。

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI TestStand 2020 Semiconductor Module
发布日期：2021/2/5
包含的版本：2021完整版，版本号20.0.0
受支持的操作系统
Windows 7 (SP1) 64-bit
Windows 8.1 64-bit
Windows 10 64-bit
Windows Embedded Standard 7 (SP1)
Windows Server 2008 R2 (SP1) 64-bit
Windows Server 2012 R2 64-bit
Windows Server 2016 64-bit
语言：English
应用程序位数：64位
校验和：
文件大小: 496988160 字节 (473.96 MB)
修改日期: 2022-03-25 19:26
MD5: 23419ed0b8c840d5381bdecb7615de8a
SHA1: 1a03c00dc29db45204f0a2b9eddc1f66086178b2
SHA256: f92f621407483e0d3ca8a290c393e8d46fc13151e5ce3395559d9a37667476b9
CRC32: 5df5544e

百度网盘和NI官方下载地址：
请注册登录视觉论坛账号，购买附件查看下载地址
TestStand 2020 Semiconductor x64.txt (628 Bytes, 下载次数: 0, 售价: 10 元)

2022-11-28 16:30 上传

点击文件名下载附件

NI TestStand 2020 Semiconductor Module Readme

January 2021

This file contains important information about the NI TestStand 2020 Semiconductor Module™ (TSM), including system requirements and installation instructions. Refer to the What's New in the NI TestStand 2020 Semiconductor Module topic in the NI TestStand Semiconductor Module Help for information about new features and changes introduced since NI TestStand 2019 Semiconductor Module. Select Help»TestStand Help and navigate to the NI TestStand Semiconductor Module book in the table of contents of the TestStand Help to launch the NI TestStand Semiconductor Module Help. Refer to the TestStand Version 2020 Release Notes and the TestStand 2020 Readme for additional information about TestStand.

---

Overview

System Requirements

Supported Operating Systems

Application Software Support

Installation Instructions

Product Security and Critical Updates

Known Issues

Bug Fixes

Accessing the Help

Finding Examples

Automating the Installation of NI Products

Using NI Software with Microsoft Windows 10

Using NI Software with Microsoft Windows 8.1

NI TestStand Semiconductor Module Drops Support for Windows 7 (32- and 64-Bit), Windows Server 2008 R2, and All 32-Bit Windows Operating Systems in 2021

Legal Information

---

Overview

TSM adds the following features and functionality to TestStand for developing semiconductor test system software:

• Multisite pin map file, TSM Code Module APIs, and Semiconductor Multi Test step type for developing a semiconductor test program that runs on multiple test system hardware configurations with a variable number of test sites at a high parallel test efficiency
• Support for binning devices under test (DUTs) based on test results
• Support for exporting and importing test limits with text files
• Data types, configurable callbacks, and dialog boxes for specifying test program settings, test station settings, and test lot information
• Plug-in architecture for handler and prober communication using TSM handler/prober drivers
• Result processing plug-ins for generating report and data log files for the test lot, such as Standard Test Data Format (STDF) log files
• Plug-in architecture for performing part average testing
• Customizable operator interface for executing test programs, enabling or disabling test sites, displaying statistics, and configuring test lot information and test station settings
• A set of step types with template code to perform common operations, such as setting up and closing instruments, powering up a DUT, or executing common tests
• Customizable pin- and site-aware instrument panel VIs for debugging instruments during test program execution at a breakpoint
  

New TestStand Users

If you are a new TestStand user, NI recommends that you complete the tasks listed in the New Users section of the Guide to Documentation topic of the TestStand Help, which is located by default at \Doc\Help\TSHelp.chm. Select Help»TestStand Help to launch the TestStand Help.

New TSM Users

To familiarize yourself with TSM, review the topics in the Getting Started book in the NI TestStand Semiconductor Module Help, which is located by default at \Doc\Help\TSSemiconductor.chm. Select Help»TestStand Help and navigate to the NI TestStand Semiconductor Module book in the table of contents of the TestStand Help to launch the NI TestStand Semiconductor Module Help. The NI TestStand Semiconductor Module Help also contains information about all module features and functionality.

Upgrade Users

If you are upgrading from an earlier version of TSM, refer to the NI TestStand 2020 Semiconductor Module New Features and the NI TestStand 2020 Semiconductor Module Compatibility and Known Issues topics in the NI TestStand Semiconductor Module Help for compatibility information and major feature changes. Select Help»TestStand Help and navigate to the NI TestStand Semiconductor Module book in the table of contents of the TestStand Help to launch the NI TestStand Semiconductor Module Help.

Note  If you are upgrading from an earlier version of TSM and use a custom operator interface based on the NI TestStand Semiconductor Module 2013 or earlier operator interface source code, you must re-implement the custom operator interface to use the latest TSM operator interface source code, which includes improvements for performance, customization, and maintenance.

System Requirements

TSM has the following requirements:

• Pentium 4/M or equivalent (Pentium G1 or higher recommended)
• At least 40 MB of disk space. This value is in addition to the free hard disk space TestStand requires.
• 1 GB RAM (2 GB or more recommended)
  

Supported Operating Systems

TSM 2020 supports the following operating systems:

• Windows 10/8.11/7 SP12
• Windows Server 2012 R21
• Windows Server 2016
  

1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.

2 NI software is signed with a SHA-256 certificate. Windows 7 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 and KB3125574 for more information about how to install these updates. Refer to the Migrating to TestStand 2012 and Windows 7/Vista section of the NI TestStand Version 2012 Release Notes for more information about using TestStand on Windows 7.

Note  Refer to NI TestStand Semiconductor Module Drops Support for Windows 7 (32- and 64-Bit), Windows Server 2008 R2, and All 32-Bit Windows Operating Systems in 2021 for information about future OS support.

Note  TestStand does not support Guest user accounts on Windows. TestStand supports Administrator and Limited accounts on Windows 7.

Note  In 2016 TSM dropped support for Windows Vista, Windows XP, Windows Server 2003, and installations of Windows 7 without any service packs. TSM 2020 will not install or run on an unsupported OS. You cannot deploy or distribute applications that use TSM 2020 to an unsupported OS. Additionally, after installing TSM 2020, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.

For more information about the changes to our OS support for 2020, refer to KB 79UC78LS, NI Installer Fails on Windows XP/Vista and Windows Server 2003.

Note  Support for Windows 32-bit operating systems may require disabling physical address extension (PAE). To learn how this might affect your system and what actions you might need to take, visit ni.com/r/PAESupport.

Application Software Support

TSM 2020 supports the following application software versions, including service packs. If you are using Microsoft Visual Studio, refer to Microsoft Visual Studio Support.

Requirement	Recommended	Minimum	Comments
TestStand (32- or 64-bit)	2020	2020	Refer to the Recommended System Requirements section of the TestStand Version 2020 Release Notes for information about the recommended system requirements for TestStand.
LabVIEW (32- or 64-bit)	2020	2017	TSM APIs are compiled for the LabVIEW 2017, 2018, 2019, and 2020 Run-Time Engines. The LabVIEW operator interface, Lot and Station Settings dialog boxes, and simulated handler are compiled for the LabVIEW 2019 Run-Time Engine.
(Optional) NI-DAQmx 16.1.0f2 or later .NET API	—	—	The TSM NI-DAQmx .NET Code Module API requires the NI-DAQmx 16.1.0f2 or later .NET API.

Microsoft Visual Studio Support

If you are using the TSM .NET Class Library, .NET Framework 4.0 (minimum) is required. The TSM .NET Class Library can be used with Visual C# or Visual Basic .NET in any Visual Studio version that can target .NET Framework 4.0 or .NET Framework 4.5.

To use the .NET API, you must install the .NET class libraries or the .NET wrapper in addition to the NI device driver. For information about versions of the .NET Framework and the drivers each supports, as well as the download location of the installer files, refer to NI .NET Support.

Installation Instructions

The TSM installation program installs files for TestStand and LabVIEW, including the LabVIEW 2020 Run-Time Engine.

Notes:

• TSM 2020 installs SeqEdit.exe.config in the \Bin directory and overwrites any existing file with the same filename in that directory. If you have created a custom SeqEdit.exe.config file, complete the following steps to preserve the custom file.
  
  • Move the existing SeqEdit.exe.config file to a location outside the directory.
  • Install TSM 2020.
  • Compare the SeqEdit.exe.config file TSM 2020 installed to the custom version of the file and merge the custom changes into the file TSM 2020 installed.
    
• If you are installing more than one NI product, visit ni.com/info and enter the Info Code tsminstall to access the NI support article Installation Order for Multiple NI Software Products for more information about this situation. If you install or update LabVIEW after you install TestStand or TSM, close and restart TestStand or run the TestStand Version Selector to properly configure LabVIEW, TestStand, and TSM.
• NI recommends that you exit all programs before running the TSM installer. Applications that run in the background, such as virus scanning utilities, might cause the installer to take longer than average to complete.
• Visit ni.com/info and enter the Info Code rddrau to access the latest software drivers and updates.
  

NI installs TSM using NI Package Manager. If you do not already have NI software installed, TSM installs NI Package Manager to handle the installation of your NI software. Visit ni.com/r/NIPMDownload to download NI Package Manager. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.

Notes

• If Windows Update is enabled, the installation process might hang if Windows Update interferes with the installation of Microsoft Visual C++ 2015 Run-Time. Visit ni.com/r/exjq43 for more information and steps to resolve this issue.
• If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.
• Use the serial number that is included with your software to activate TSM. For more information on TSM activation, refer to NI Software Activation.
  

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.

Known Issues

You can access the software and documentation known issues list online. Visit Known Issues in NI TestStand 2020 Semiconductor Module for an up-to-date list of known issues.

Bug Fixes

Refer to the List of Bug Fixes in NI TestStand 2020 Semiconductor Module on the NI website for a list of a subset of issues fixed in NI TestStand 2020 Semiconductor Module. This is not an exhaustive list of issues fixed in NI TestStand 2020 Semiconductor Module. If you have a Bug ID, you can search this list to validate that the issue has been fixed.

Accessing the Help

Refer to the NI TestStand Semiconductor Module book in the TestStand Help, accessible from the Help menu in the TestStand Sequence Editor, for information about NI TestStand 2020 Semiconductor Module.

Finding Examples

TSM includes a variety of example programs that you can use to help you learn key concepts or to serve as a starting point for applications you create. You can open an example sequence file from the subdirectories of the \Examples\NI_SemiconductorModule directory.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.

If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.

For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.

Using NI Software with Microsoft Windows 10

Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.

Using NI Software with Microsoft Windows 8.1

When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.

NI TestStand Semiconductor Module Drops Support for Windows 7 (32- and 64-Bit), Windows Server 2008 R2, and All 32-Bit Windows Operating Systems in 2021

NI TestStand Semiconductor Module will drop support for Windows 7 (32- and 64-bit), Windows Server 2008 R2, and all 32-bit Windows operating systems starting in 2021. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit ni.com/r/win32bitsupport.

---

Legal Information

Copyright

© 2013-2021 National Instruments Corporation. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

• Notices are located in the \_Legal Information and directories.
• EULAs are located in the \Shared\MDF\Legal\license directory.
• Review \_Legal Information.txt for information on including legal information in installers built with NI products.
  

U.S. Government Restricted Rights

If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.

IVI Foundation Copyright Notice

Content from the IVI specifications reproduced with permission from the IVI Foundation.

The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.

375326G-01