NI-FieldPoint 6.0.6
发布日期：2010/1/20
包含的版本：6.0.6完整版
受支持的操作系统
Windows 7 (32-bit and 64-bit*)
Windows Vista (32-bit and 64-bit*)
Windows XP (32-bit)
Windows Server 2003 R2 (32-bit)
Windows Server 2008 R2 (64-bit*)
语言：English
应用程序位数：32/64位
校验和：
文件大小: 581798432 字节 (554.85 MB)
修改日期: 2022-03-25 22:42
MD5: 730800c184f735ebadd4062f45cba02e（重复一致）
SHA1: 1cbeda88f5927feee37f4994f887be1bd272d484
SHA256: eb346040a1466800f4b751d65a2c4ffb43f71be58b2c84c9170abc56d12af246
CRC32: b44a4ea9
CVI™, FieldPoint™, LabVIEW™, National Instruments™, and ni.com™ are trademarks of National Instruments Corporation.
Product and company names mentioned herein are trademarks or trade names of their respective companies.
This document contains important information about using the FieldPoint software with National Instruments application development environments. Please read this document completely before using the FieldPoint software.
Supported Operating Systems
You can run the FieldPoint installer on the following operating systems:
Windows 7 (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows XP (32-bit)
Windows 2000
Windows Server 2003 R2 (32-bit)
Windows Server 2008 R2 (64-bit)
The FieldPoint installer does not support Windows NT/Me/98/95 or the Windows Server non-R2 editions.
Note National Instruments is committed to maintaining compatibility with Microsoft Windows technology changes. However, NI has become aware of a number of issues of potential significance regarding Microsoft Windows 7. To learn how Windows 7 affects your use of NI products, visit ni.com/info and enter the info code windows7.
New in FieldPoint 6.0.6Support for LabVIEW 2009 SP1FieldPoint 6.0.6 Bug Fixes
The following items are changes from FieldPoint 6.0.5 to FieldPoint 6.0.6.
Bug ID
Fixed Issue
#195541
cFP-AO 200 Range Configuration doesn't update if Watchdog and Power-Up Values are out of range.
#184453
NI-FP 6.0.5 Full Package Installation doesn't work with LabVIEW 8.5.1.
#182228
Scaling doesn't work for AI channels with non-default names on systems with multiple FieldPoint targets.
#167414
LabVIEW may hang when adding an offline FP RT target to a LabVIEW project
Known Issues in FieldPoint 6.0.6cFP-180x User LED Is Inaccessible through Serial Port
The cFP-180x User LED channel is accessible only through an Ethernet connection. You cannot read or control the User LED through a serial connection.
Remote I/O Error Reporting May Not Match Host VI Error Reporting
A VI running embedded on an RT controller may report errors for remote I/O that do not match the errors reported by the same VI running on a host computer. For example, if an AI channel is out of range, an FP Read running on a host computer reports an Out of Range error. The same VI running on an RT controller returns channel-specific error A or B. Refer to the Attributes, Ranges, and Commands topic of the FieldPoint LabVIEW Interface Help for information about error messages (channel status). Doing remote I/O over serial may result in an Unknown Tag error (32812) if initialization with the module fails.
Upgrading FieldPoint RT Controllers to LabVIEW Real-Time Module 8.2.1, 8.5.1, 8.6.1, and 2009
The cFP-22xx controllers require LabVIEW Real-Time Module 8.5.1 or later. The cFP-21xx controllers require LabVIEW Real-Time Module 8.0 or later. National Instruments recommends LabVIEW Real-Time Module 7.1.1 for use on the [c]FP-20xx controllers. The [c]FP-20xx controllers do not support LabVIEW Real-Time Module 8.6 or later. Some features of LabVIEW Real-Time Module 8.x require more than 16 MB RAM, and the [c]FP-2000 and some other [c]FP-20xx controllers have only 16 MB RAM. Use the Remote Systems Install Software Wizard in MAX to install LabVIEW and FieldPoint software on FieldPoint controllers. For more information about memory and storage requirements of different LabVIEW versions, go to ni.com/info and enter the Info Code rdlrmf.
LabVIEW Real-Time and FieldPoint Software on FieldPoint RT Controllers
For information about which versions of the LabVIEW Real-Time Module and FieldPoint software components on the FieldPoint RT controller are compatible with each other, go to ni.com/info and enter the Info Code fpswlist.
FieldPoint 6.0.5 Bug Fix
The following items are changes from FieldPoint 6.0.4 to FieldPoint 6.0.5.
Bug ID
Fixed Issue
#153619
WSN IOV cannot run on FieldPoint target.
FieldPoint 6.0.4 Bug Fix
The following items are changes from FieldPoint 6.0.3 to FieldPoint 6.0.4.
Bug ID
Fixed Issue
#124852
FieldPoint installer should install FieldPoint OPC Server with interactive user access by default.
FieldPoint 6.0.3 Bug Fix
The following items are changes from FieldPoint 6.0.2 to FieldPoint 6.0.3.
Bug ID
Fixed Issue
#124187
MAX and LabVIEW do not detect I/O modules located in the 8th slot of the [c]FP backplane
FieldPoint 6.0.2 Bug Fixes
The following items are changes from FieldPoint 6.0.1 to FieldPoint 6.0.2.
Bug ID
Fixed Issue
#94982
Fixed "Error 2961: The following files had problems ...\project.iak" when a user checks a project into source code control.
#55186
Fixed problem with FP Publish Data VIs truncating strings with NULL characters.
#55314
Removed FieldPoint Express VI from the FieldPoint Palette.
#45053
FieldPoint 6.0.2 supports MAX feature that can delete all disconnected remote systems.
FieldPoint 6.0 Bug Fixes
The following items are changes from FieldPoint 5.0.1 to FieldPoint 6.0.
Bug ID
Fixed Issue
3GCDKL6B
Fixed an issue with the Ethernet Config VIs that prevented the use of these VIs with several modules.
3LDGT7J9
Fixed the Measure Frequency VI to use the correct Gating Pulse Frequency.
3V69AHXL
Fixed an issue where LabVIEW Built DLLs that used FieldPoint I/O Control would return a Pure Virtual Function Call Error.
3YDDHMX8
Fixed an issue that prevented serial device addresses from being detected in LabVIEW.
3ZJ9NMHL
Fixed an issue where modifying channels within a FieldPoint item in MAX changed channel scaling assignments.
439AGCU9
Fixed an issue that prevented writing to cFP-PG-522 tags when using an OPC Client.
43F8891Y
Fixed an issue where LabVIEW would sometimes return a Pure Virtual Function Call error upon exit.
46K6QN00
Fixed an issue where scaling would be assigned to the wrong channel if scaling was enabled for "ALL" channels.
49GFMBX6
Fixed an issue that did not allow the FieldPoint I/O Server to run without the LabVIEW Development Environment.
4AAG6AZ3
Fixed an issue where embedded programs on FieldPoint RT controllers would abort if the first read was performed on a remote offline module.
MiscellaneousNI-FieldPoint 6.0.X supports the following LabVIEW Versions:
This table shows only major versions but includes all maintenance releases.
NI-Fieldpoint
Supported LabVIEW Versions
6.0
7.1/8.0/8.2/8.5
6.0.1
7.1/8.0/8.2/8.5
6.0.2
7.1/8.2/8.5/8.6
6.0.3
7.1/8.2/8.5/8.6
6.0.4
7.1/8.2/8.5/8.6
6.0.5
8.2/8.5/8.6/2009
6.0.6
8.2/8.5/8.6/2009
FieldPoint IAK Configuration File Included in Application
With FieldPoint 6.0.2, you can include FieldPoint configuration files in the data directory of a LabVIEW application. Check Include hardware configuration files on the Advanced tab in Application Properties to use this feature. The built application will use the IAK configuration file in the data directory instead of the IAK file registered with the system.
Which IAK file LabVIEW uses for a VI depends on the type of VI, whether or not the VI is part of a LabVIEW project, and whether or not the VI has been built into an executable. The table below describes which IAK file is used in each case.
Type of VI
VI in a LabVIEW Project
VI not in a LabVIEW Project
VI built into an EXE
Polymorphic FP Read, FP Write and FP Write/Read
IAK file associated with the Project
Most recently opened IAK file
IAK file distributed with EXE
FP Get Configuration.vi
IAK file associated with the LabVIEW Project
Most recently opened IAK file
IAK file distributed with EXE
Legacy VIs (FP Open, FP Create Tag, FP Close)
Most recently opened IAK file
Most recently opened IAK file
Most recently opened IAK file
Support for Measurement & Automation Explorer (MAX) 4.5 to Delete Disconnected Remote Systems
To delete a disconnected remote system, right-click Remote Systems in MAX and select Delete Disconnected Systems. Offline FieldPoint systems with saved configurations will not be deleted.
Creating a FieldPoint Distribution Kit
If you are deploying a FieldPoint executable built with LabVIEW 8.0, you can include FieldPoint 5.0 in the installer. You also must copy the .iak file associated with the project to your application.
If you are deploying a FieldPoint executable built with LabVIEW 7.0 for systems that do not have LabVIEW installed, you should install the LabVIEW support from the FieldPoint installation CD.
To create a FieldPoint executable using LabWindows/CVI, you must include FPCVIMgr.DLL in the distribution kit. By default this file is installed in the \WINNT\system32 folder for Windows 2000/NT/XP.
The .iak file created in MAX also must be included with the FieldPoint distribution kit.
FieldPoint OPC Server
The latest FieldPoint OPC server supports version 2.04 of the OPC Interface Specifications.
NOTE: The return value for tags of type VT_BOOL has changed from +1 to -1 (0xFFFF - VARIANT_TRUE) to comply with the OPC specifications. All discrete input and output items (except the "All" item) for FieldPoint channels are defined to be of type VT_BOOL. If you have an OPC application that checks for data values strictly equal to +1 for discrete items, change it to check for -1 or for a non-zero value (recommended).
楼主
