发布日期：2015/06/19
包含的版本：15.0.0
受支持的操作系统
Windows 8.1 (32-bit and 64-bit)
Windows 8.0 (32-bit and 64-bit)
Windows 7 (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows XP Service Pack 3 (32-bit)
Windows Server 2003 R2 (32-bit)
Windows Server 2008 R2 (64-bit)
Windows Server 2012 R2 (64-bit)
语言：English
应用程序位数：32/64位
校验和：
文件大小: 556421920 字节 (530.65 MB)
修改日期: 2022-03-25 06:09
MD5: 1d341e201bc51f274c899205274bce78（秒传）
SHA1: ea95024a16bcec75410e04bcf2ceb310af333fbf
SHA256: f908ec20b372432ff5b69ac13090fc2f220a17154351fffeec67ccd0138363fd
CRC32: 9bd7c55e
Thank you for using the NI LabVIEW Modulation Toolkit (MT). This file contains important information about the NI LabVIEW Modulation Toolkit and is organized into the following sections:
New Features
Supported Hardware
System Requirements
Installed Software, Documentation, and Examples
Documentation
Accessing VIs and Functions
Finding Examples
Product Security and Critical Updates
Toolkit Version Naming Changes
Uninstalling/Modifying NI LabVIEW Modulation Toolkit
Known Issues
Bug Fixes
Automating the Installation of NI Products
How to Use NI Software with Microsoft Windows 8.x
NI Software Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003
Legal Information
New Features
NI LabVIEW Modulation Toolkit 15.0 includes the following new features:
Support for LabVIEW 2015 (32- and 64-bit)
Support for QAM 512, 1024, 2048, 4096
NI LabVIEW Modulation Toolkit 4.4 includes the following new features:
Support for LabVIEW 2013 and LabVIEW 2014 (32- and 64-bit)
Support for Offset EVM measurement for OQPSK
Support for EVM normalization for QAM
Support for quadrature skew measurement for OQPSK
NI LabVIEW Modulation Toolkit 4.3.4 adds support for LabVIEW 2012 (32- and 64-bit).
NI LabVIEW Modulation Toolkit 4.3.2 adds support for LabVIEW 2011 (32- and 64-bit).
NI LabVIEW Modulation Toolkit 4.3 includes the following new features:
Support for MLSE demapper for CPM and MSK
Support for non-systematic encoder-decoder for BCH and Hamming codes
Support for clock frequency offset estimation and correction for FSK, PSK, and QAM
Support for palette-level function for autoconfiguring and performing CCDF measurement
NI LabVIEW Modulation Toolkit 4.2 includes the following new feature:
Japanese localization for LabVIEW application programming interface (API) and documentation
Supported HardwareVector Signal Generators
NI PXI-5670
NI PXI-5671
NI PXIe-5672
NI PXIe-5673
NI PXIe-5673E
Device-specific information about these modules is included in the NI RF Signal Generators Help.
Arbitrary Waveform Generators
NI PXIe-5442
NI PXIe-5450
NI PXIe-5451
Vector Signal Analyzers
NI PXI-5660
NI PXI-5661
NI PXIe-5663
NI PXIe-5663E
NI PXIe-5665
NI PXIe-5668R
Device-specific information about these modules is included in the NI RF Vector Signal Analyzers Help.
Vector Signal Transceivers
NI PXIe-5644R
NI PXIe-5645R
NI PXIe-5646R
Device-specific information about these modules is included in the NI RF Vector Signal Transceivers Help.
Digitizers
NI PXI-5621
NI PXI-5620
NI PXI-5122
NI PXI-5124
NI PCI-5122
NI PCI-5124
NI PXI-5922
NI PXI-5142
NI PXIe-5122
NI PXIe-5622
Device-specific information about these modules is included in the NI High-Speed Digitizers Help.
System RequirementsSupported Operating Systems
NI LabVIEW Modulation Toolkit 15.0 supports the following operating systems:
Windows 8.1 (32-bit and 64-bit)
Windows 8.0 (32-bit and 64-bit)
Windows 7 (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows XP Service Pack 3 (32-bit)
Windows Server 2003 R2 (32-bit)
Windows Server 2008 R2 (64-bit)
Windows Server 2012 R2 (64-bit)
Note NI LabVIEW Modulation Toolkit 15.0 and later does not support Windows Server non-R2 editions.
NI recommends that you have the most recent service pack for your operating system installed.
Supported Real-Time Operating Environments
NI LabVIEW Modulation Toolkit 15.0 and later supports the following real-time operating environments:
LabVIEW Real-Time Module
Minimum System Requirements
Processor—Intel i3 or equivalent
RAM—
Windows 8.1/8.0/7/Vista: 2 GB*
Windows XP SP3: 256 MB*
A screen resolution of 1,024 x 768
Windows 8.1/8/7/Vista/XP SP3, with all available critical updates and service packs
If you are running your application on an RT target, 128 MB of memory or more is recommended.
Recommended System
Processor—Intel i5 or equivalent
RAM—
Windows 8.1/8.0/7/Vista: 4 GB*
Windows XP SP3: 2 GB*
A screen resolution of 1,024 x 768
Windows 8.1/8.0/7/Vista/XP SP3, with all available critical updates and service packs
If you are running your application on an RT target, 128 MB of memory or more is recommended.
Note Instrument drivers are not required for NI LabVIEW Modulation Toolkit operation in simulation mode. However, the toolkit installs examples for the supported drivers if they are present on the system. Refer to the Supported Drivers section of this document for more information.
Application Development Environments (ADEs)
Note You should install ADEs, such as NI LabVIEW before installing NI LabVIEW Modulation Toolkit. To add support for ADEs installed after installing NI LabVIEW Modulation Toolkit, modify your NI LabVIEW Modulation Toolkit installation or launch the NI LabVIEW Modulation Toolkit installer again.
If you are running your application on an RT target, 128 MB of memory or more is required
Installed Software, Documentation, and ExamplesInstalled Software
is an alias for the following National Instruments file folder location:
Windows 8.1 (32-bit)/8.0 (32-bit)/7 (32-bit)/Vista (32-bit)/XP: Program Files\National Instruments
Windows 8.1 (64-bit)/8.0 (64-bit) /7 (64-bit)/Vista (64-bit): Program Files (x86)\National Instruments
is an alias for the following National Instruments file folder location:
Windows 8.1/8.0/7/Vista/XP: \LabVIEW
File Locations
Item
Installed Location on Windows 8.1/8.0/7/Vista/XP
VIs
\vi.lib\addons\Modulation
Examples
\examples\Modulation
Documentation
Documentation for NI LabVIEW Modulation Toolkit 15.0 is located at Start»All Programs»National Instruments»Modulation Toolkit Documentation. The documentation set is composed of the following documents.
Document
Format
Description
NI LabVIEW Modulation Toolkit Help
HTML/Windows Help
Contains primary help content for NI LabVIEW Modulation Toolkit products. The help is an HTML version of a traditional user manual that includes the following information:
An introduction to NI LabVIEW Modulation Toolkit
A complete reference for all NI LabVIEW Modulation Toolkit programming VIs
NI LabVIEW Modulation Toolkit Readme
HTML (this document)
Contains information about supported hardware and operating systems, new features, fixed issues, and legal notices.
For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals.
Accessing VIs and Functions
NI LabVIEW Modulation Toolkit palette VIs are available from the Functions»RF Communications»Modulation palette.
Finding Examples
In LabVIEW, you can use the NI Example Finder to search or browse examples. NI LabVIEW Modulation Toolkit examples are classified by keyword, so you can search for a particular device or measurement function. In LabVIEW, select Help»Find Examples to launch the NI Example Finder. The NI Example Finder offers two ways to access all installed LabVIEW example VIs (including NI–RFSG and NI Modulation Toolkit examples) and their descriptions:
Click the Browse tab to locate modulation examples by task at Toolkit and Modules»Modulation or by directory structure at Modulation.
Click the Search tab to search all installed examples by keyword. For example, search for "Modulation" to locate all NI LabVIEW Modulation Toolkit examples.
You can also access all the installed NI LabVIEW Modulation Toolkit examples for LabVIEW at Start»All Programs»National Instruments»Modulation Toolkit»Modulation Toolkit Examples.
Examples also are available online that demonstrate integrating NI RF signal generators with NI RF signal analyzers and NI toolkit software including the NI LabVIEW Modulation Toolkit. Refer to ni.com/examples for these examples and for more information.
Product Security and Critical Updates
Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.
Toolkit Version Naming Changes
NI LabVIEW Modulation Toolkit versions are now aligned with the versions of major NI application software products. This alignment gives you information about the year the toolkit was released and the most recent software version the toolkit was designed to work with. Toolkit versions now start with a two-digit year indicator: . For example, NI LabVIEW Modulation Toolkit 15.0 is the version released with LabVIEW 2015. The last version released under the old numbering scheme is NI LabVIEW Modulation Toolkit 4.4. The first version released under the new numbering scheme is NI LabVIEW Modulation Toolkit 15.0.
Uninstalling/Modifying NI LabVIEW Modulation Toolkit
For Windows XP, complete the following steps:
Launch the Control Panel by selecting Start»Control Panel.
Double-click Add or Remove Programs.
Select National Instruments Software.
Click Change/Remove.
Select NI LabVIEW Modulation Toolkit 15.0 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.
For Windows 7/Vista, complete the following steps:
Launch the Control Panel by selecting Start»Control Panel.
Double-click Programs and Features.
Select National Instruments Software.
Click the Uninstall/Change button.
Select NI LabVIEW Modulation Toolkit 15.0 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.
For Windows 8.1/8.0, complete the following steps:
Right-click on the Start screen.
Select All apps, and launch the Control Panel.
Select Programs»Programs and Features.
Select National Instruments Software.
Click the Uninstall button.
Select NI LabVIEW Modulation Toolkit 15.0 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.
Note Do not attempt to uninstall by manually deleting files.
Known Issues
You can access the software and documentation known issues list online. Refer to the NI LabVIEW Modulation Toolkit 15.0 Known Issues at ni.com for an up-to-date list of known issues in NI Modulation Toolkit 15.0.
Bug Fixes
The following items are changes in NI LabVIEW Modulation Toolkit 15.0 from NI LabVIEW Modulation Toolkit 4.4.
ID
Fixed Issue
521869
Fixed an issue where MT examples for NI-Scope had NI-RFSA dependency.
525695
Fixed an issue where OQPSK intermittently reported NaN as the result for IQ Gain Imbalance and Quadrature Skew measurements.
508707
Fixed an issue where intermittent loss of samples occured during continuous digital demodulation.
The following items are changes in NI LabVIEW Modulation Toolkit 4.4 from NI LabVIEW Modulation Toolkit 4.3.4.
ID
Fixed Issue
389508
Fixed DWarn 0x262C7578.
402017
Fixed an issue where MSK demodulation returned a high EVM.
462305
Fixed an issue where MSK recovered an incorrect constellation when the pulse shaping filter was set to None.
362507
Fixed an issue where installing MT 4.3.3 did not install digital modulation related files on LabVIEW 2012.
404991
Fixed an issue where controls could not be created for Modulation Toolkit classes.
415930
Fixed an issue where the OQPSK demodulation did not lock to the constellation consistently.
426459
Fixed an issue where EVM variations were observed in 8-PSK and 16-PSK demodulation.
The following items are changes in NI LabVIEW Modulation Toolkit 4.3.4 from NI LabVIEW Modulation Toolkit 4.3.3.
ID
Fixed Issue
362507
Fixed an issue where installing NI LabVIEW Modulation Toolkit 4.3.3 did not install Digital Modulation Toolkit VIs on LabVIEW 2012.
374121
Fixed an issue where NI LabVIEW Modulation Toolkit did not install on LabVIEW 2012.
404822
Fixed an issue where multiple shortcuts to documents were present in the Start Menu folder for NI LabVIEW Modulation Toolkit.
The following items are changes in NI LabVIEW Modulation Toolkit 4.3.3 from NI LabVIEW Modulation Toolkit 4.3.2.
ID
Fixed Issue
322185
Fixed an issue where some files were missing in the Modulation Toolkit after upgrading LabVIEW and reinstalling the toolkit for the upgraded version.
320449
Fixed an issue where license manager was unable to check out Modulation Toolkit license from certain packages in a volume license file.
The following items are changes in NI LabVIEW Modulation Toolkit 4.3.2 from NI LabVIEW Modulation Toolkit 4.3.1.
ID
Fixed Issue
294171
Fixed an issue where an error message about conflicts between different dir.mnu is displayed when opening a VI from a LabVIEW project that has Modulation Toolkit dependencies.
The following items are changes in NI LabVIEW Modulation Toolkit 4.3.1 from NI LabVIEW Modulation Toolkit 4.3.
ID
Fixed Issue
294170
Fixed an issue where LabVIEW projects that have Modulation Toolkit dependencies take a long time to load.
294916
Fixed an issue where an error message is displayed while compiling a project that refers to mod_Symbols to Bits.vi.
298309
Fixed an issue where analog modulation VIs are not installed on upgrading from MT 4.1 to 4.3.1.
293100
Fixed an issue where Modulation Toolkit does not install properly on LabVIEW versions after 2010 SP1.
The following items are changes in NI LabVIEW Modulation Toolkit 4.3 from NI LabVIEW Modulation Toolkit 4.2.1.
ID
Fixed Issue
147127
Fixed an issue where the offsets seem to be off by one sample in the MT Phase Noise example.
176993
Fixed an issue where the sideband rejection in AM-SSB is correlated to the sample rate of the message signal, and cannot be reduced below a certain dB level.
223422
Fixed an issue where the Gaussian pulse does not integrate to unity.
233207
Fixed an issue in FSK modulation, where the pulse shape filter rampup that needs to be deleted must be equal to the length of the filter.
239324
Fixed an issue where the search (+/- % of Fsampl) parameter of the pilot extraction filter cluster is used incorrectly during AM-SSB and AM-VSB demodulation.
244292
Fixed an issue where the constellation trace shows ghost points when a BPSK symbol is defined in PSK simulation.
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
How to Use NI Software with Microsoft Windows 8.x
When you install National Instruments software on Microsoft Windows 8.x, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher.
Using NI Launcher
NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile in the Apps view. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.
Note NI MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8.x. You can launch NI MAX either from the Apps view or from within NI Launcher.
Pinning Frequently Used Applications
For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary.
Current Application
Icon Location
Pin to Action
Windows 8.x Desktop
Desktop Taskbar
Right-click application and select Pin to Taskbar
Windows 8.x Desktop
Start screen
Right-click application and select Pin to Start
Windows 8.x Start screen
Desktop Taskbar
Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen
Finding All Programs
If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files from the Apps view. To get to the Apps view, right-click anywhere on the Start screen and select All apps (Windows 8.0) or click the down arrow on the bottom left of the screen (Windows 8.1).
For more information about NI support for Windows 8.x, visit ni.com/windows8.
NI LabVIEW Modulation Toolkit Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016
National Instruments LabVIEW Modulation Toolkit will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of LabVIEW Modulation Toolkit that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the \_Legal Information and directories.
EULAs are located in the \Shared\MDF\Legal\license directory.
Review \_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
楼主
