发布日期：2009/06/10
包含的版本：2009
受支持的操作系统
Windows 7 (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows XP Service Pack 2 or later
Windows Server 2003 R2 (32-bit)
Windows Server 2008 R2 (64-bit)
语言：英语/韩语
应用程序位数：32位
校验和：
LabVIEW 2009 Embedded Module for ARM Microcontrollers Readme
July 2009
This file contains important information about the LabVIEW Embedded Module for ARM Microcontrollers.
Installation
You must install the RealView Microcontroller Development Kit and activate the Keil μVision License ID Code (LIC) before you install the Embedded Module for ARM Microcontrollers. You can find installation instructions Embedded Module for ARM Microcontrollers with activation instructions in the Getting Started with the LabVIEW Embedded Module for ARM Microcontrollers manual, which is available in your module software kit and online at ni.com/manuals.
Known Issues
You can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in the Embedded Module for ARM Microcontrollers.
Bug Fixes
The following table contains the IDs and titles of a subset of issues fixed in LabVIEW 2009 Embedded Module for ARM Microcontrollers. This table is not an exhaustive list of issues fixed in the current version of the Embedded Module for ARM Microcontrollers. If you have a CAR ID, you can search this list to validate the issue has been fixed.
ID
Legacy ID
Description
154759
–
Missing Feedback Node in LabVIEW ARM
137499
–
ARM and shipping example documentation: CAN_Loopback.lvproj, straight through serial cable needed to run, not null modem cable
162865
–
ARM 1.1, Old Memory Access.xml in place after upgrading from ARM 1.0 to 1.1
141720
–
RTFIFO VIs for embedded targets link to the Real-Time Module RTFIFO.llb
169050
–
PWM pins do not toggle with MCB2300 Generic I/O
133575
–
Adding a second needle to a dial instrument in LV 8.6/ARM 1.1 causes a compile error in uVision.
136537
–
Link errors with fixed point
130195
–
Ring controls cause linker errors
130644
–
TCP example on MCB2300 fails to build with Generate C function calls enabled in the build specifications
118495
–
Enabling Optimize subVI calls in build specifications sometimes causes the build to fail
38853
3IR9ELO9
Call Chain function cannot be used with Timed Loops
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
Trademarks
National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.
Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
楼主
