发布日期：2009/9/26
包含的版本：2009
受支持的操作系统
Windows
Windows 2000
Windows XP
语言：德语, 日语, 法语, 英文
应用程序位数：32位
校验和：
文件大小: 708602400 字节 (675.78 MB)
修改日期: 2009-07-15 05:42
MD5: 1ca246627382f684d259c96c22ae4e1a（重复一致）
SHA1: c934e6026d17e007a5ddfb025ef2d52ae9c4eda1
SHA256: da1f15b59737848ceda0de169a6acc34b93702abef28e6ac18fb1369848d9656
CRC32: dba226a7
百度网盘和NI官方下载地址：
请注册登录视觉论坛账号，购买附件查看下载地址 SignalExpress2009.txt(1.04 KB, 下载次数: 0, 售价: 10 快钱)
2022-12-7 15:24 上传
点击文件名下载附件
LabVIEW SignalExpress 2009 Readme
June 2009
This file contains important information about LabVIEW SignalExpress 2009, including known issues, installation instructions, and compatibility issues. Refer to Getting Started with LabVIEW SignalExpress for information about getting started with LabVIEW SignalExpress. You can access this PDF by selecting Help»Getting Started with»LabVIEW SignalExpress in the LabVIEW SignalExpress environment.
This file contains the following information that you need to understand.
Overview
Supported Platforms
System Requirements
Installation Instructions
Installing from the LabVIEW 2009 Platform DVDs
Installing from the LabVIEW SignalExpress 2009 Installation Media
Using Hardware with LabVIEW SignalExpress
Accessing the Help
Finding Examples
Compatibility
Deprecated Steps
Known Issues
Bug Fixes
Overview
LabVIEW SignalExpress is an interactive measurement program you can use to acquire, analyze, log, and present data from hundreds of data acquisition devices and instruments, with no programming required. Use LabVIEW SignalExpress to create projects that acquire, analyze, create, generate, and display signals. You can acquire signals from hardware devices installed on your computer, analyze the signals, and then send the resulting signals to hardware devices.
Supported Platforms
LabVIEW SignalExpress supports Windows Vista/XP/2000. LabVIEW SignalExpress does not support Windows NT/Me/98/95, any of the Windows Server editions, or Windows Vista/XP x64.
System Requirements
To run LabVIEW SignalExpress, National Instruments recommends that your system meet the following requirements:
1 GB of memory (512 MB minimum)
2 GB of free disk space (1.5 GB minimum)
Pentium 4 processor or equivalent (866 MHz minimum)
Installation Instructions
Note If you are using Windows 2000, you must install Service Pack 4 and all additional critical updates before you install LabVIEW SignalExpress.
Installing from the LabVIEW 2009 Platform DVDs
(Windows Vista/XP/2000) If you purchased LabVIEW 2009, you can install all of your LabVIEW products—including LabVIEW SignalExpress—using the LabVIEW 2009 Platform DVDs. You can find installation instructions for LabVIEW SignalExpress along with activation instructions in the following locations:
LabVIEW Release Notes, which are available in your LabVIEW software kit.
LabVIEW 2009 Platform DVDs Readme, which is available on the top-level of LabVIEW Platform DVD 1.
To request additional LabVIEW 2009 Platform DVDs, refer to the National Instruments Web site.
Note If you purchased the Full or Professional Edition of LabVIEW 2009, you also can use the serial number included with LabVIEW 2009 to activate LabVIEW SignalExpress. If you purchased the Base Package of LabVIEW 2009, you must purchase LabVIEW SignalExpress separately to obtain a separate serial number to activate LabVIEW SignalExpress.
Installing from the LabVIEW SignalExpress 2009 Installation Media
Complete the following steps to install LabVIEW SignalExpress 2009 from the LabVIEW SignalExpress installation media.
Log on as an administrator or as a user with administrator privileges.
Insert the LabVIEW SignalExpress 2009 installation media and follow the instructions that appear on the screen.
(Optional) Activate LabVIEW SignalExpress when prompted by the installer, or activate at a later time using the NI License Manager.
Note LabVIEW SignalExpress LE is a free, limited version of LabVIEW SignalExpress that does not include all of the steps or features available in the Full Edition. When you install LabVIEW SignalExpress, you have a 30-day trial of the Full Edition of LabVIEW SignalExpress. After that period, you must activate LabVIEW SignalExpress LE or purchase the Full Edition.
Using Hardware with LabVIEW SignalExpress
Complete the following steps to use LabVIEW SignalExpress with hardware.
Install the appropriate driver. For Multifunction DAQ, use NI-DAQmx. For high-speed digitizers, use NI-SCOPE. For signal generators, use NI-FGEN. For digital multimeters, use NI-DMM. All drivers are available on the Driver CD.
Shut down the computer.
Install the hardware.
Restart the computer to complete the software installation.
Accessing the Help
Refer to the LabVIEW SignalExpress Help, accessible by selecting Help»LabVIEW SignalExpress Help in LabVIEW SignalExpress, for information about LabVIEW SignalExpress.
Finding Examples
Example projects for LabVIEW SignalExpress are located in the signalexpress\examples folder. You can modify an example project to fit an application, or you can copy and paste from one or more examples into a project that you create.
Compatibility
To convert a LabVIEW SignalExpress project to a LabVIEW VI, you must have the LabVIEW 8.2 Full Development System or later installed.
Note LabVIEW SignalExpress does not support the 64-bit version of LabVIEW 2009.
LabVIEW SignalExpress is compatible with the following products:
NI-DAQmx 8.5 or later
NI-SCOPE 2.7 or later
NI-FGEN 2.2 or later
NI-HSDIO 1.3.1 or later
NI-HWS 1.3.1 or later
NI-DMM 2.4.1 or later
NI-DCPower 1.0 or later
IVI Driver Toolset 2.0 or later
LabVIEW SignalExpress installs the NI Measurement Studio Network Variable and WindowsForms support in the .NET Global Assembly Cache for runtime purposes.
Deprecated Steps
The following steps are deprecated in LabVIEW SignalExpress 2009:
Run LabVIEW 7.1 VI
Run LabVIEW 8.0 VI
Known Issues
You can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in LabVIEW SignalExpress.
Bug Fixes
The following items are the IDs and titles of a subset of issues fixed between LabVIEW SignalExpress 3.0 and LabVIEW SignalExpress 2009. This is not an exhaustive list of issues fixed in the current version of LabVIEW SignalExpress. If you have a CAR ID, you can search this list to validate the issue has been fixed.
ID
Legacy ID
Fixed Issue
30123
4F7AQSGX
Output names not correct when copying steps with different numbers of outputs
30134
4EG9K63W
Load from LVM support for custom x-axis or y-axis units is incomplete
30249
430KTUI8
Deleting the active log does not make the previous log active
30273
42TDIKI8
Default Chart Display plot configuration does not display non-continuous scalar logs
30278
3I3EDMRS
Cannot add sweep parameters to a second project if dialog is still open in first project
30283
44SBMUX1
Cannot move divider in Table display
30314
42GA7UYG
LED display does not scale properly
30430
3AAG9L7W
Cannot arrange displays on Data View tab
30711
4A9KBD0Q
Create Analog Signal should allow user to set units for data
30745
459C7VK9
Load from file Express VIs do not have file inputs after code generation
30785
4599B7K9
Limit Test Express VI does not import scalar limits during code generation
30792
4A0D83LY
Record While Running state not saved with project
30859
4STJGCI8
Return subset of Subset and Resample step should be enabled by default
30874
440BCJ00
Arithmetic step does not clear error while running
52425
4B28OCN7
Warning messages disappear too quickly
97328
-
Events that occur before logging starts appear in Alarms and Events dialog
107647
-
LabVIEW SignalExpress will not launch from shortcut if installed in non-default location
107910
-
Clicking Run next iteration button in a Playback work area clears Chart Display
109322
-
Create Log Subset allows you to edit axes and then expand range beyond limits of log
110505
-
Errors with start/stop condition time stamps not reported
110709
-
Context help missing for Operator Interface Font properties
111131
-
Tab key focus lost on Playback Options tab
111981
-
Window step preview graph always shows four elements
112931
-
Limit Test preview graph does not display limit signals correctly
114382
-
Tone Extraction graph for Exported Time Signal does not show units correctly
115197
-
Error on undo after deleting a step while running
116201
-
Exporting to ASCII file after logging causes error when acquiring in N Samples mode
117619
-
Cannot import Channel View data from Excel if view was sorted by Measurement Type at export
118331
-
Server polling rate from DAQmx appears with volts as units
119194
-
Cannot load certain displays when System Identification Assistant or Control Design Assistant is installed
119812
-
Crash opening Sound and Vibration Assistant project that writes to shared variables
120787
-
Convert Analog to Digital returns an empty waveform when the input signal is out of range
121024
-
Operator Interface control bound to Limit Test upper or lower limit does not work while running
121185
-
Used and free disk space values incorrect on Recording Options tab
122416
-
Non-waveform signals have white (invisible) plot 0 on Project Documentation tab
122612
-
Crash when deleting multiple graphs from the Project Documentation tab
124046
-
Exporting logged data to Excel loses the original time stamp
124415
-
Autoscaling x axis does not work in certain cases
124514
-
Project cannot load if Load from UFF58 step contains subgroup outputs
124517
-
Subgroups not saved with project
124584
-
Signal trigger stop condition does not stop logging at the correct time
124652
-
Playback ignores Stop playback time
124689
-
Alarm triggers Alarm OFF action on Alarm ON event
125164
-
Formula step preview graph does not show signal names in legend
125226
-
Create Log Subset context menu option does not work
125759
-
Save to ASCII/LVM Express VI does not append data to file
126360
-
Cannot import log if name contains special characters
126908
-
Cannot play back log after defining subgroups
126914
-
Cannot display frequency signal if scale is logarithmic but not autoscaled
126935
-
Subgroup definition lost after changing Power Spectrum step configuration
127178
-
LabVIEW SignalExpress cannot connect to Industrial IO Variables for EtherCAT
127213
-
Conditional Repeat before a Sequence step results in Error 200587
127288
-
Hang when Prepare log data for viewing is set to After logging completes
127438
-
Chart display does not remember formatting when project is reopened
127518
-
Reloading a project with a locked cursor results in cursor not being movable
127535
-
Removing a signal from a display causes other signals to disappear
127541
-
Missing execution events when performing offline analysis on a scalar log
127545
-
Write to Shared Variable does not work on signals within a group
127635
-
Adding sweepable parameters allowed in operator mode and can cause crash
127882
-
Playback speed not saved with project
128696
-
Cursors not supported for XY data
129581
-
Crash when Prepare log data for viewing is set to After logging completes and Acquisition Mode is N Samples
130081
-
LabVIEW SignalExpress does not output Digital Line value when recieving programmatic input
130521
-
Cannot read LVM files saved in LabVIEW 8.6
130536
-
Project file size increases when saving the project
131022
-
Subgroups add extra rows to preview table in DAQmx Acquire step
131412
-
Options not saved in LabVIEW SignalExpress or Sound and Vibration Assistant
131461
-
Outputs of LabVIEW SignalExpress Express VI are constants
131547
-
Crash opening project that writes to shared variables
131992
-
Only first four outputs of synchronized steps are named correctly in generated LabVIEW code
134172
-
Project hangs when Sequence step is deleted
135488
-
Alarms and events that occur in the pretrigger section are not recorded
134751
-
Sound and Vibration Assistant crashes when you delete a spectrum graph from the Project Documentation view
140828
-
Logs created in LabVIEW SignalExpress 2.5 are not exportable in LabVIEW SignalExpress 3.0
141397
-
Cannot export log subsets to Microsoft Excel
142313
-
LabVIEW SignalExpress crashes when adding multiple signals to a table
142589
-
Read Shared Variable steap fails to read data published by another project
142687
-
Data View ignores log time stamps by default
142863
-
Log titles do not update
142905
-
LabVIEW SignalExpress ignores logging settings after warning
142913
-
Clicking Acquire in the Channel View for a shared variable crashes LabVIEW SignalExpress
143248
-
Event Viewer does not show user-specified events in a log
143604
-
Digital Graph display does not display discontinuous logs correctly
144590
-
Repeat start/stop cycle option on Start Conditions page of Recording Options tab resets to 1 when a second log is created
144981
-
Load from ASCII cannot import comma-delimited files
146609
-
Logging does not restart correctly when no start condition is specified
147899
-
Data disappears from the Data View tab when Format and Precision is changed
147938
-
Load from LVM step cannot load an LVM file that uses a localized decimal seperator
149683
-
Data View tab does not always update multiple signals simultaneously
150096
-
LabVIEW SignalExpress hangs when you acquire n samples with Automatically export log to ASCII file set to Yes
150455
-
Dragging a signal from a data group to Wordpad crashes LabVIEW SignalExpress
150573
-
Cannot view a subset of a non-continuous digital log
150771
-
LabVIEW SignalExpress does not always play back entire log
152834
-
Closing LabVIEW SignalExpress project with open signal probes can cause crash
154231
-
Crash when you undo deleting a display from the Project Documentation view
155116
-
Hang when removing the last signal from a display with a Preview Graph
161327
-
Digital Graph display does not show correct signal names when you rename a signal
161384
-
Subset and Resample step settings not saved with project
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
Trademarks
National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.
Patents
For patents covering the National Instruments products, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or ni.com/patents.
楼主
