NI RFmx WLAN 2023 Q1
发布日期：2023/2/3
包含的版本：2023 Q1完整版，版本号23.0.0
受支持的操作系统：
Windows 11
Windows Server 2022 64-bit
Windows 10 64-bit
Windows Server 2016 64-bit
Windows Server 2019 64-bit
语言：English
应用程序位数：64位
This file contains important information about the RFmx WLAN, including system requirements, and installation instructions.
You can find more release information on ni.com.
RFmx WLAN Release Notes: Known issues, bugs fixed since the last release, and other notes about this release
RFmx WLAN Manuals: New features, behavior changes, and other documentation
New Features
Supported Hardware
System Requirements
Supported Operating Systems
Application Software Support
Installation Instructions
Installed Software
File Locations
Executable
Accessing the API
Accessing the Documentation
Finding Examples
Product Security and Critical Updates
Behavior Changes
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 11
New Features
RFmx WLAN 2023 Q1 includes the following new features:
Support for LabVIEW 2023 Q1 (64-bit)
Support for Fields Gated Power for 802.11be standard
Support for 802.11be Standard IEEE P802.11be/D2.3
RFmx WLAN 2022 Q4 includes the following new features:
Support for 802.11be Standard IEEE P802.11be/D2.1.1
Support for calculating EVM for WLAN Preamble fields
Support for analyzing 320 MHz non-HT duplicate mode frame format
Support for PXIe-5842
RFmx WLAN 2022 Q3 includes the following new features:
Support for LabVIEW 2022 Q3 (64-bit)
802.11be standard support has been updated to comply with IEEE P802.11be/D2.0 specification
Support for dB Units in Common Pilot Error Magnitude trace
Supported Hardware
Visit NI Hardware and Operating System Compatibility to view driver, desktop operating system, and real-time operating system support for individual hardware devices.
To view information for your device:
Select your hardware model in the dropdown list on the page to view compatibility information for your device.
Type your hardware model number in the dropdown list on the web page to filter the list of available devices.
Note: Some compatibility information may only be available in the archive attached to the NI Hardware and Operating System Compatibility page. For historic driver and OS support information, refer to the readme for the relevant driver version.
System Requirements
RFmx WLAN has the following requirements:
Processor—1 GHz 64-bit (x64) processor
4 GB RAM *
A screen resolution of 1,024 x 768
Any supported OS, with all available critical updates and service packs
* Depending on the amount of data acquired and/or processed, a larger amount of memory may be required.
Supported Operating Systems
RFmx WLAN 2023 Q1 supports the following 64-bit operating systems:
Windows 11
Windows 10
Windows Server 2022
Windows Server 2019
Windows Server 2016
Note RFmx WLAN no longer supports Windows Vista/XP/7/8.1, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. RFmx WLAN 2023 Q1 will not install or run on an unsupported OS. You cannot deploy or distribute applications that use RFmx WLAN 2023 Q1 to an unsupported OS. Additionally, after installing RFmx WLAN 2023 Q1, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.
RFmx WLAN supports the following application software versions, including service packs. You should install application software, such as LabVIEW or Microsoft Visual Studio®, before installing RFmx WLAN. If you are not using NI application software, refer to Microsoft Visual Studio Support.
Application Software
Versions Supported by RFmx WLAN (64-bit only)
LabVIEW
2020 SP1, 2021 SP1 f1 patch, 2022 Q3, 2023 Q1
Required Software
NI-RFSA 14.1 or later
NI-RFSA 17.1 or later (for initializing debug session when "using breakpoints in C/C++/.NET application" is selected)
Microsoft Visual Studio Support
If you are using the RFmx WLAN .NET Class Library, .NET Framework 4.0 (minimum) is required. The RFmx WLAN .NET Class Library can be used with Visual C# or Visual Basic .NET in any Visual Studio version that can target .NET Framework 4.0 or .NET Framework 4.5.
Installation Instructions
Download the RFmx WLAN installer from ni.com/downloads. NI software includes NI Package Manager to handle the installation. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.
Notes
RFmx WLAN installs the following licensed products:
WLAN: Enables analysis of 802.11a/b/g/j/p/n/ac/ax/11be signals with standard-compliant physical layer measurements such as error vector magnitude (EVM), spectrum emission mask (SEM), transmit power (TXP), and more. RFmx WLAN supports single-user and advanced multi-user signals with flexible configurations, impairments, and measurement results per user.
WLAN MIMO: Enables analysis of 802.11n/ac/ax/be MIMO signals with standard-compliant physical layer measurements such as error vector magnitude (EVM), spectrum emission mask (SEM), transmit power (TXP), and more. RFmx WLAN supports single-user and advanced multi-user signals with flexible MIMO configurations, impairments, and measurement results per user/per chain/per segment.
Notes
If Windows Update is enabled, the installation process might hang if Windows Update interferes with the installation of Microsoft Visual C++ 2015 Run-Time. Visit ni.com/r/exjq43 for more information and steps to resolve this issue.
Use the serial number that is included with your software to activate RFmx WLAN. For more information on RFmx WLAN activation, refer to National Instruments Software Activation.
Installed Software
is an alias for the following National Instruments file folder location:
Program Files (x86)\National Instruments\MeasurementStudioVS2010
is an alias for the following National Instruments file folder location:
Program Files (x86)\National Instruments
is an alias for the following file folder location:
Select Start » National Instruments » InstrumentStudio to launch the InstrumentStudio.
Accessing the API
RFmx WLAN palette VIs are available from the Functions » Measurement I/O » RFmx » WLAN palette.
Accessing the Documentation
Documentation for RFmx WLAN is located at Start » National Instruments » RFmx WLAN Documentation.
Finding Examples
You can access all the installed RFmx WLAN examples at Start » National Instruments » RFmx WLAN Examples.
For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals.
Product Security and Critical Updates
Visit ni.com/security to view and subscribe to receive security notifications about NI products. For information about critical updates from NI, refer to Available Critical and Security Updates for NI Software.
Behavior Changes
The following are the behavior changes in RFmx WLAN 2022 Q3 from RFmx WLAN 21.8.2:
The RFmx Soft Front Panel has been replaced by InstrumentStudio.
EVM Noise compensation includes support to work for Linear, Wiener and Triangular Smoothing channel estimation interpolation types
The following are the behavior changes in RFmx WLAN 21.8 from RFmx WLAN 21.5.
RFmx WLAN drops support for 32-bit user mode.
When you set the OFDMModAcc Noise Comp Enabled property to True:
Noise compensation applied limit check is now skipped if OFDMModAcc EVM Ref Data Symbols Mode property is set to Reference Waveform
EVM per Subcarrier and the EVM per Symbol traces now follow the noise compensation applied result
The following are the behavior changes in RFmx WLAN 20.7 from RFmx WLAN 20.6.
Obsoleted the RFmxInstr Configure Automatic SG SA Shared LO API and the RFmxInstr Automatic SG SA Shared LO property. Use RFmxInstr LO Source property with Automatic_SG_SA_Shared value instead.
Obsoleted RFmxWLAN OFDMModAcc Results HE-LTF Size property and RFmxWLAN OFDMModAcc Fetch HE-LTF Size API. Use RFmxWLAN OFDMModAcc Results LTF Size property and RFmxWLAN OFDMModAcc Fetch LTF Size API instead.
Obsoleted RFmxWLAN OFDM Num HE-LTF Symbols property. Use RFmxWLAN OFDM Num LTF Symbols property instead.
Obsoleted public int FetchPpduInformation(string selectorString, double timeout, out RFmxWlanMXDsssModAccDataModulationFormat dataModulationFormat, out int payloadLength, out RFmxWlanMXDsssModAccPreambleType preambleType, out int lockedClocksBit, out int headerCrcStatus, out int psduCrcStatus) method. Use public int FetchPpduInformation(string selectorString, double timeout, out RFmxWlanMXDsssModAccDataModulationFormat dataModulationFormat, out int payloadLength, out RFmxWlanMXDsssModAccPreambleType preambleType, out int lockedClocksBit, out RFmxWlanMXDsssModAccPayloadHeaderCrcStatus headerCrcStatus, out RFmxWlanMXDsssModAccPsduCrcStaus psduCrcStatus) method instead.
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.
For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.
Using NI Software with Microsoft Windows 11
Microsoft Windows 11 is the latest version of the Windows operating system and features significant changes compared to previous versions. For more information about NI support for Windows 11, refer to NI Product Compatibility for Microsoft Windows 11.
楼主
